What Consulting Engineers Do
Related Articles
Best Practices for Using PIR Sensors, Part 2
This is the second of a 2-part introductory series on passive infrared (PIR) sensors. Part 1 highlighted how PIR sensors detect motion, discussed the importance of the sensor lens, and the different types of motion that can be detected.
Test Your Knowledge of the Canadian Electrical Code – Part 1: Motors & Generators
Take this opportunity to test your knowledge of the Canadian Electrical Code – Part 1. Here are four questions on motors and generators.
Apprentice Electrician Pay by City
Among six cities, the median pay for apprentice electricians in Fort McMurray is $26,000 above the national average, while at the opposite end the pay in Saskatoon is $10,000 below.
Suite Metering for Multi-Unit Residential Buildings with Steven Lupo
This is the third article we’ve done in this series with Trilliant Canada Managing Director, Steven Lupo.
Guide to the Canadian Electrical Code, Part I — Instalment 8
Since earlier articles were based on the 23rd Edition of the CEC, Part I, I have revised these articles to reflect any changes made pursuant to the 24th Edition. This edition of the CEC, Part I, (C22.1-18), is available from CSA Group.
Best Practices for Using PIR Sensors, Part 2
This is the second of a 2-part introductory series on passive infrared (PIR) sensors. Part 1 highlighted how PIR sensors detect motion, discussed the importance of the sensor lens, and the different types of motion that can be detected.
Test Your Knowledge of the Canadian Electrical Code – Part 1: Motors & Generators
Take this opportunity to test your knowledge of the Canadian Electrical Code – Part 1. Here are four questions on motors and generators.
Apprentice Electrician Pay by City
Among six cities, the median pay for apprentice electricians in Fort McMurray is $26,000 above the national average, while at the opposite end the pay in Saskatoon is $10,000 below.
Suite Metering for Multi-Unit Residential Buildings with Steven Lupo
This is the third article we’ve done in this series with Trilliant Canada Managing Director, Steven Lupo.
Guide to the Canadian Electrical Code, Part I — Instalment 8
Since earlier articles were based on the 23rd Edition of the CEC, Part I, I have revised these articles to reflect any changes made pursuant to the 24th Edition. This edition of the CEC, Part I, (C22.1-18), is available from CSA Group.
Best Practices for Using PIR Sensors, Part 2
This is the second of a 2-part introductory series on passive infrared (PIR) sensors. Part 1 highlighted how PIR sensors detect motion, discussed the importance of the sensor lens, and the different types of motion that can be detected.
Test Your Knowledge of the Canadian Electrical Code – Part 1: Motors & Generators
Take this opportunity to test your knowledge of the Canadian Electrical Code – Part 1. Here are four questions on motors and generators.
Apprentice Electrician Pay by City
Among six cities, the median pay for apprentice electricians in Fort McMurray is $26,000 above the national average, while at the opposite end the pay in Saskatoon is $10,000 below.
Suite Metering for Multi-Unit Residential Buildings with Steven Lupo
This is the third article we’ve done in this series with Trilliant Canada Managing Director, Steven Lupo.
Guide to the Canadian Electrical Code, Part I — Instalment 8
Since earlier articles were based on the 23rd Edition of the CEC, Part I, I have revised these articles to reflect any changes made pursuant to the 24th Edition. This edition of the CEC, Part I, (C22.1-18), is available from CSA Group.
Latest Articles
-
Code Quiz: Section 26 – Installation of Electrical Equipment
April 7, 2025 By Bill Burr Section 26 – Installation of Electrical Equipment Receptacles Question: Rule 26-706 specifies that all receptacles of CSA configuration 5-15R and 5-20R installed in: …must have a particular feature, what is this feature? Source: CSA C22.1:24, Canadian Electrical Code, Part 1 – Safety Standard for Electrical Installations. © 2021 Canadian… Read More…
-
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 32](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 32
Section 32, as outlined in rule 32 -000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, and protection, of fire alarm systems… Read More…
-
Alberta Municipalities EV Charging Installation Rebate
April 4, 2025 Alberta Municipalities are proud to provide financial rebates for applicants to purchase and install electric vehicle charging stations in Alberta as part of the Electric Vehicle Charging Program (EVCP), funded by Natural Resources Canada (NRCan) & Alberta Municipalities. The funding will cover up to 46% of your total project cost, which can… Read More…
-
Industry Legend Bill Smith Retires
April 4, 2025 By Electro-Federation Canada On March 25, Electrozad, a Sonepar Company, hosted a special retirement reception at Caesars Windsor for industry titan Bill Smith who marked an incredible 50-year career with the company. The reception was held in the elegant Caesars Ballroom, which featured an array of food stations and elegant decor. In… Read More…
Changing Scene
-
NSAA Fee Change Effective April 1, 2025
As of April 1, 2025, the Nova Scotia Apprenticeship Agency’s fees have changed due to the 1% reduction in HST in Nova Scotia. NSAA noted on their website that due to the number of references across various pages, you may still come across old fee amounts as they work through updating their website. Here is… Read More…
-
Nominations Open for 2024 NETCO Leadership Excellence Award
Established in 2016, the NETCO Leadership Excellence award honours an industry training professional for his/her role for the success and their outstanding contributions to apprenticeship training and continuing electrical training. Read More…
-
Munded Partners with Kane Test Equipment in Atlantic Canada
April 4, 2025 Munden Enterprises has announced a partnership with Kane Test Equipment to bring their test and measurement solutions to Atlantic Canada. “We are now excited to announce a new and promising partnership with Kane Test Equipment. Kane Test Equipment brings innovative solutions that align with our dedication to providing the best tools for… Read More…
-
Nedco Announces Western Canadian Wire & Cable Sales Manager
April 4, 2025 Don Blake has joined Nedco as their Western Canadian Wire & Cable Sales Manager. “With over 20 years of experience in the Wire & Cable industry, Don brings a wealth of knowledge and expertise to our Nedco West team,” said the company on LinkedIn. “His focus will be on expanding our product… Read More…
