Number of power establishments by employment size category and region: December 2015
March 8 2016
The small and micro enterprises form the largest number of electrical workers.
Source: Statistics Canada http://www.servicecanada.gc.ca
Related Articles
The Four Types of Collaborative Robot Operation
Collaborative robots are becoming increasingly popular in manufacturing. As more companies adopt automation, there are many tasks identified that require people to work in collaboration with a robot.
Addressing Machine And System Operational Risks In The Safety Lifecycle
In manufacturing, it is not enough to say that the operation of machines and systems is critical to the creation of the end product. “Operation” is only one part of the equation. Efficient production of end products depends on the correct operation of machines and systems in all scenarios.
Noark Electric’s Breaker Modification Center is Expanding to Better-Serve Electrical OEMs Across North America
August 21, 2023 Noark’s Mod Center is Expanding to Better-Serve Electrical OEMs Across North America Noark is a global manufacturer of low-voltage electrical components for industrial applications and their specialties involve motor control and circuit protection products for original equipment manufacturers (OEMs). Their entire portfolio of products is designed for ease of manufacturing and assembly. Each…
Mitsubishi Canada’s FS Wall Mounted Hyper-Heat Plus Heat Pump Extends Heating Capacity to -20°C
Heat pumps use air to heat refrigerant to produce heat inside the home. They are an alternative to electric baseboard heating, natural gas, oil and propane, which has the benefit of efficiency and a lower carbon footprint.
The Canadian Electrical Code: Adapting to Change and Driving Innovation
Since its first publication in 1927, the Canadian Electrical Code, Part I (CE Code Part I), has been a vital instrument in promoting electrical safety across Canada. Its creation was spurred by the widespread adoption of electricity in the early 20th century.
The Four Types of Collaborative Robot Operation
Collaborative robots are becoming increasingly popular in manufacturing. As more companies adopt automation, there are many tasks identified that require people to work in collaboration with a robot.
Addressing Machine And System Operational Risks In The Safety Lifecycle
In manufacturing, it is not enough to say that the operation of machines and systems is critical to the creation of the end product. “Operation” is only one part of the equation. Efficient production of end products depends on the correct operation of machines and systems in all scenarios.
Noark Electric’s Breaker Modification Center is Expanding to Better-Serve Electrical OEMs Across North America
August 21, 2023 Noark’s Mod Center is Expanding to Better-Serve Electrical OEMs Across North America Noark is a global manufacturer of low-voltage electrical components for industrial applications and their specialties involve motor control and circuit protection products for original equipment manufacturers (OEMs). Their entire portfolio of products is designed for ease of manufacturing and assembly. Each…
Mitsubishi Canada’s FS Wall Mounted Hyper-Heat Plus Heat Pump Extends Heating Capacity to -20°C
Heat pumps use air to heat refrigerant to produce heat inside the home. They are an alternative to electric baseboard heating, natural gas, oil and propane, which has the benefit of efficiency and a lower carbon footprint.
The Canadian Electrical Code: Adapting to Change and Driving Innovation
Since its first publication in 1927, the Canadian Electrical Code, Part I (CE Code Part I), has been a vital instrument in promoting electrical safety across Canada. Its creation was spurred by the widespread adoption of electricity in the early 20th century.
The Four Types of Collaborative Robot Operation
Collaborative robots are becoming increasingly popular in manufacturing. As more companies adopt automation, there are many tasks identified that require people to work in collaboration with a robot.
Addressing Machine And System Operational Risks In The Safety Lifecycle
In manufacturing, it is not enough to say that the operation of machines and systems is critical to the creation of the end product. “Operation” is only one part of the equation. Efficient production of end products depends on the correct operation of machines and systems in all scenarios.
Noark Electric’s Breaker Modification Center is Expanding to Better-Serve Electrical OEMs Across North America
August 21, 2023 Noark’s Mod Center is Expanding to Better-Serve Electrical OEMs Across North America Noark is a global manufacturer of low-voltage electrical components for industrial applications and their specialties involve motor control and circuit protection products for original equipment manufacturers (OEMs). Their entire portfolio of products is designed for ease of manufacturing and assembly. Each…
Mitsubishi Canada’s FS Wall Mounted Hyper-Heat Plus Heat Pump Extends Heating Capacity to -20°C
Heat pumps use air to heat refrigerant to produce heat inside the home. They are an alternative to electric baseboard heating, natural gas, oil and propane, which has the benefit of efficiency and a lower carbon footprint.
The Canadian Electrical Code: Adapting to Change and Driving Innovation
Since its first publication in 1927, the Canadian Electrical Code, Part I (CE Code Part I), has been a vital instrument in promoting electrical safety across Canada. Its creation was spurred by the widespread adoption of electricity in the early 20th century.
Latest Articles
-
![Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 40 — Electric Cranes and Hoists](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 40 — Electric Cranes and Hoists
Rule 40-000 Scope – This is a supplementary or amendatory section of the code and applies to the installation of electrical equipment and circuits for electric cranes, hoists, and monorails. Read More…
-
EFC: The Voice of Standards and Code Development
July 30, 2025 By Electro-Federation Canada Electro-Federation Canada (EFC) plays a vital role in shaping the regulatory and technical landscape of Canada’s electrical and automation sectors. Through active participation on key strategic and technical committees, EFC represents the collective interests of its members and ensures that the development of standards and codes is informed by… Read More…
-
Bold, Programmable Lighting Upgrade Helps Draw Visitors to Chinook Centre in Calgary
July 30, 2025 Chinook Centre Can Now Brightly Celebrate Local Events, Holidays & Causes with New Thematic Exterior LED Lighting The CF Chinook Centre (more commonly known as Chinook Centre) was always destined to be a major destination point for Calgary. Opened in 1965, it is conveniently located near the city center and is only 20 minutes from… Read More…
-
Electrical Devices GFCI Safety Outlet Sold at Home Hardware Recalled due to Fire Hazard
July 25, 2025 Product: Electrical Devices GFCI Safety Outlet sold at Home Hardware Issue: Consumer products – Fire hazard What to do: Immediately stop using the recalled products, contact Unison Ridge for instructions on how to uninstall and return them to any Home Hardware store for a refund. This recall involves three white coloured models… Read More…
Changing Scene
-
SurgePure Corporation Expands into the Mid-West with New Representation Partner, Advance Electrical Agency
August 1, 2025 SurgePure Corporation is proud to announce its new partnership with Advance Electrical Agency, who will represent the company across Saskatchewan, Manitoba, and Western Ontario. Led by principals Darren Churchwell and Bob Fiesel , the Advance team is part of a well-established agency known for representing some of the most respected manufacturers in… Read More…
-
Munden Partners with Valid Manufacturing in Atlantic Canada
August 1, 2025 Munden Enterprises has announced that they are back in the custom enclosure business through a new partnership with Valid Manufacturing Ltd. Expect Canadian-made, engineered solutions for industrial, utility, transportation, wastewater, renewables, and beyond. Whether you need a bare enclosure or a fully assembled panel, Munden is here to help. Reach out to… Read More…
-
JEHS Joins Forces with NOARK to Deliver Smarter Electrical Solutions in Ontario
August 1, 2025 NOARK Electric is pleased to announce a new partnership with Cambridge, Ontario based manufacturing representitive, JEHS. This strategic collaboration will expand NOARK’s reach and customer support across Ontario and beyond, bringing reliable and innovative electrical solutions to a wider audience. With over 50 years of combined sales experience, JEHS brings a strong… Read More…
-
BC Hydro Making it Easier and More Affordable to Connect New Homes
July 24, 2025 BC Hydro is supporting the construction of new housing developments in growing communities by advancing changes to streamline upgrades and reducing the cost of new customer connections to BC Hydro’s electricity grid. “As communities across B.C. grow, so does the need for essential housing. We are committed to ensuring we’re ready to… Read More…
