Contractor Salaries By Gender

Many people thrive on the freedom that comes with working alone, but with that freedom come risks. What if something goes wrong? For those of you who work on your own, or employ others who work on their own, here are eight steps that can help reduce the risk of something going wrong and ensure support is available when needed…
February 2, 2025 Overall, investment in building construction edged down 0.5% (-$96.6 million) to $21.4 billion in November, following a 1.1% decrease in October. Year over year, investment in building construction grew 2.7% in November. The monthly decline in investment in building construction in November was driven by the residential sector (-$168.1 million to $14.8 billion) but was partially offset by a…
In this article: Section 54 — Community Antenna Distribution and Radio and Television Installations. Rule 54-000 states that Section 54 is a supplementary or amendatory section of the code and applies to community antenna distribution, equipment for the reception of radio and television broadcast transmission…
Take this opportunity to test your knowledge of the Canadian Electrical Code – Part 1. Last week we published questions about motors and generators. You’ll find the answers in EIN articles written by our code experts — mainly Bill Burr and Terry Becker — and of course in your own best practices.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
August 4, 2023 Sunsets in Kelowna, the third-largest metropolitan area in Canada’s British Columbia, are a bit more dramatic these days thanks to a new high-performance lighting system that spotlights the Rhapsody Dolphins Statue located on the city’s waterfront. The large-scale fiberglass sculpture of three dolphins frolicking in a fountain is the creation of renown…
Many people thrive on the freedom that comes with working alone, but with that freedom come risks. What if something goes wrong? For those of you who work on your own, or employ others who work on their own, here are eight steps that can help reduce the risk of something going wrong and ensure support is available when needed…
February 2, 2025 Overall, investment in building construction edged down 0.5% (-$96.6 million) to $21.4 billion in November, following a 1.1% decrease in October. Year over year, investment in building construction grew 2.7% in November. The monthly decline in investment in building construction in November was driven by the residential sector (-$168.1 million to $14.8 billion) but was partially offset by a…
In this article: Section 54 — Community Antenna Distribution and Radio and Television Installations. Rule 54-000 states that Section 54 is a supplementary or amendatory section of the code and applies to community antenna distribution, equipment for the reception of radio and television broadcast transmission…
Take this opportunity to test your knowledge of the Canadian Electrical Code – Part 1. Last week we published questions about motors and generators. You’ll find the answers in EIN articles written by our code experts — mainly Bill Burr and Terry Becker — and of course in your own best practices.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
August 4, 2023 Sunsets in Kelowna, the third-largest metropolitan area in Canada’s British Columbia, are a bit more dramatic these days thanks to a new high-performance lighting system that spotlights the Rhapsody Dolphins Statue located on the city’s waterfront. The large-scale fiberglass sculpture of three dolphins frolicking in a fountain is the creation of renown…
Many people thrive on the freedom that comes with working alone, but with that freedom come risks. What if something goes wrong? For those of you who work on your own, or employ others who work on their own, here are eight steps that can help reduce the risk of something going wrong and ensure support is available when needed…
February 2, 2025 Overall, investment in building construction edged down 0.5% (-$96.6 million) to $21.4 billion in November, following a 1.1% decrease in October. Year over year, investment in building construction grew 2.7% in November. The monthly decline in investment in building construction in November was driven by the residential sector (-$168.1 million to $14.8 billion) but was partially offset by a…
In this article: Section 54 — Community Antenna Distribution and Radio and Television Installations. Rule 54-000 states that Section 54 is a supplementary or amendatory section of the code and applies to community antenna distribution, equipment for the reception of radio and television broadcast transmission…
Take this opportunity to test your knowledge of the Canadian Electrical Code – Part 1. Last week we published questions about motors and generators. You’ll find the answers in EIN articles written by our code experts — mainly Bill Burr and Terry Becker — and of course in your own best practices.
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
August 4, 2023 Sunsets in Kelowna, the third-largest metropolitan area in Canada’s British Columbia, are a bit more dramatic these days thanks to a new high-performance lighting system that spotlights the Rhapsody Dolphins Statue located on the city’s waterfront. The large-scale fiberglass sculpture of three dolphins frolicking in a fountain is the creation of renown…
July 21, 2025 The Home Renovation Savings™ program and make meaningful improvements today that pay off long term. Level up to a smart thermostat, invest in solar energy or install a heat pump. Smart upgrades like these can make your home more energy efficient, comfortable and ready for whatever the season brings. And best of… Read More…
July 21, 2025 Black & McDonald is proud to celebrate the remarkable sustainability achievements of Women’s College Hospital (WCH) — a dedicated member of the Greening Health Care (GHC) network, which supports healthcare facilities across North America in reducing energy use and greenhouse gas emissions. At this year’s GHC Summer Workshop, WCH was honored with… Read More…
July 21, 2025 The total value of investment in building construction decreased by $491.4 million to $21.8 billion in May. Investment in the residential sector fell 3.0%, while the non-residential sector edged down 0.4%. On a constant dollar basis (2023=100), the total value of investment in building construction in May was down 2.3% from the previous month and was up 3.1%… Read More…
ABB’s Microlectric BP320-A Self-Contained Meter Socket is now available through distribution channels in BC. Launched in 2015, the BP320 is also certified by Hydro-Quebec for use in Quebec, as well as some areas in Atlantic Canada. Read More…
July 21, 2025 More British Columbians will benefit from a heat pump this summer with the B.C. government’s launch of a new program for income-qualified apartment renters and condo owners. The Better Homes Energy Savings Program Condo and Apartment Rebate will provide rebates up to $5,000 to support the purchase and installation of high-performance electric… Read More…
July 21, 2025 Noramco invites you to join in welcoming Dallas Heal as the company’s new Account Manager in Edmonton. Dallas brings over 20 years of hands-on experience in the electrical and construction industries, with a strong track record of leadership, technical expertise, and customer-focused service. He began his career as a Journeyman Electrician and… Read More…
July 21, 2025 The Ontario government is investing $7.5 million to protect small and medium-sized businesses across the province, helping them modernize and grow by adopting digital technologies. The Digitalization Competence Centre (DCC) helps companies to transition and find made-in-Ontario digital solutions with expert guidance, training and up to $115,000 in targeted grants. “Small businesses are the backbone… Read More…
July 21, 2025 The Ontario government is investing an additional $12.5 million to support the planning and construction of a new Brant Community Healthcare System hospital, connecting more patients and families in Brant County, Six Nations of the Grand River and surrounding communities to more convenient, high-quality care close to home. This funding builds on the… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.