Electrician Employment Drivers by Sector
Related Articles
7 Ways to Use Mobile Technology for Construction
Contractors tend to have a practical approach to their work, and in a competitive market with many moving pieces and complicated projects, investing in the latest technology can help good contractors do their work better.
Rittal – Standing with You Yesterday, Today, and Tomorrow
Support is something that all businesses have needed over the last couple years, whether that is support in gaining access to much needed supplies and components, or support in moving along projects. Throughout all of it, Rittal has continued to be a strong support. and driving force for its partners, in Canada and around the world.
What Are the Differences Between LM-79, LM-80, and TM-21?
It is important to understand the difference between these three standards because they are all used to determine the performance metrics on the label, including the optional lumen maintenance metric.
Inspection Results: Electrical Hazards Aren’t the Only Risks Electricians Face
In November and December 2016, Ontario Ministry of Labour inspectors conducted an enforcement blitz involving electrical and related hazards at construction sites.
The Growth of Energy Storage and its Impact on Electrical Contractors
Vast quantities of renewables and bi-directional flows on the grid, along with rapid cost declines and performance improvements have allowed for several major deployments of energy storage.
EHRC Agents of Change Speaker Preview
As Electricity Human Resources Canada (EHRC)’s Agents of Change 2022 national conference (October 12th and 13th in Toronto) draws closer, new details profiling the featured program and speakers have been released.
7 Ways to Use Mobile Technology for Construction
Contractors tend to have a practical approach to their work, and in a competitive market with many moving pieces and complicated projects, investing in the latest technology can help good contractors do their work better.
Rittal – Standing with You Yesterday, Today, and Tomorrow
Support is something that all businesses have needed over the last couple years, whether that is support in gaining access to much needed supplies and components, or support in moving along projects. Throughout all of it, Rittal has continued to be a strong support. and driving force for its partners, in Canada and around the world.
What Are the Differences Between LM-79, LM-80, and TM-21?
It is important to understand the difference between these three standards because they are all used to determine the performance metrics on the label, including the optional lumen maintenance metric.
Inspection Results: Electrical Hazards Aren’t the Only Risks Electricians Face
In November and December 2016, Ontario Ministry of Labour inspectors conducted an enforcement blitz involving electrical and related hazards at construction sites.
The Growth of Energy Storage and its Impact on Electrical Contractors
Vast quantities of renewables and bi-directional flows on the grid, along with rapid cost declines and performance improvements have allowed for several major deployments of energy storage.
EHRC Agents of Change Speaker Preview
As Electricity Human Resources Canada (EHRC)’s Agents of Change 2022 national conference (October 12th and 13th in Toronto) draws closer, new details profiling the featured program and speakers have been released.
7 Ways to Use Mobile Technology for Construction
Contractors tend to have a practical approach to their work, and in a competitive market with many moving pieces and complicated projects, investing in the latest technology can help good contractors do their work better.
Rittal – Standing with You Yesterday, Today, and Tomorrow
Support is something that all businesses have needed over the last couple years, whether that is support in gaining access to much needed supplies and components, or support in moving along projects. Throughout all of it, Rittal has continued to be a strong support. and driving force for its partners, in Canada and around the world.
What Are the Differences Between LM-79, LM-80, and TM-21?
It is important to understand the difference between these three standards because they are all used to determine the performance metrics on the label, including the optional lumen maintenance metric.
Inspection Results: Electrical Hazards Aren’t the Only Risks Electricians Face
In November and December 2016, Ontario Ministry of Labour inspectors conducted an enforcement blitz involving electrical and related hazards at construction sites.
The Growth of Energy Storage and its Impact on Electrical Contractors
Vast quantities of renewables and bi-directional flows on the grid, along with rapid cost declines and performance improvements have allowed for several major deployments of energy storage.
EHRC Agents of Change Speaker Preview
As Electricity Human Resources Canada (EHRC)’s Agents of Change 2022 national conference (October 12th and 13th in Toronto) draws closer, new details profiling the featured program and speakers have been released.
Latest Articles
-
Electrical Devices GFCI Safety Outlet Sold at Home Hardware Recalled due to Fire Hazard
July 25, 2025 Product: Electrical Devices GFCI Safety Outlet sold at Home Hardware Issue: Consumer products – Fire hazard What to do: Immediately stop using the recalled products, contact Unison Ridge for instructions on how to uninstall and return them to any Home Hardware store for a refund. This recall involves three white coloured models… Read More…
-
Grounded in Ontario: Episode 18 – Meter Bases – Bonding, Safety, and Section 10 Changes
July 24, 2025 ESA Technical Advisor, Trevor Tremblay, reveals how meter bases can go from simple to seriously risky if installed incorrectly. As code enforcement around meter bases ramps up, contractors must stay sharp, read all rules carefully (especially those “notwithstanding” clauses), and double-check labeling. With the right education and planning, the transition can be… Read More…
-
Report: Canada’s Construction Industry Agrees on the Importance of Investing in Technology to Meet Housing Demand
July 24, 2025 Faced with growing pressure to build more, faster, nine in 10 leading Canadian construction companies agree the industry must quickly adopt new, cutting-edge technologies, with most saying digital tools are already starting to boost their productivity, according to a new report from KPMG in Canada on digital maturity in the construction industry. “It’s good… Read More…
-
Home Renovation Savings Rebates in Ontario: Solar, Heat Pump, Smart Thermostat
July 21, 2025 The Home Renovation Savings™ program and make meaningful improvements today that pay off long term. Level up to a smart thermostat, invest in solar energy or install a heat pump. Smart upgrades like these can make your home more energy efficient, comfortable and ready for whatever the season brings. And best of… Read More…
Changing Scene
-
BC Hydro Making it Easier and More Affordable to Connect New Homes
July 24, 2025 BC Hydro is supporting the construction of new housing developments in growing communities by advancing changes to streamline upgrades and reducing the cost of new customer connections to BC Hydro’s electricity grid. “As communities across B.C. grow, so does the need for essential housing. We are committed to ensuring we’re ready to… Read More…
-
Mitrex Sets Record with Largest BIPV Solar Panel Mural at SunRise Residential in Edmonton
July 22, 2025 Building-Integrated Photovoltaics (BIPV) manufacturer, Mitrex proudly announces that its transformative SunRise Residential project in Edmonton, Alberta, has earned the Guinness World Record for the largest solar panel mural globally. This landmark project showcases Mitrex’s innovative BIPV solar panels, blending cutting-edge solar technology with vibrant cultural artistry to redefine sustainable architecture. Sustainable Architecture with BIPV Spanning over 30,000 square feet, the Mitrex eFacade PRO plus… Read More…
-
Nexans Unveils a Cable Made with 100% Recycled Materials
July 24, 2025 Nexans has reached a major milestone in its sustainability journey by developing a prototype cable made entirely from recycled materials — a first in the company’s history. This innovation combines technical performance, industrial feasibility, and a drastically reduced environmental footprint, marking a decisive step forward in circular economy. A cross-continental success story… Read More…
-
EFC Welcomes New Manufacturer Member: MGM Transformers
July 24, 2025 Since 1974, MGM Transformers has produced tough and trusted transformers designed to get the job done right. As a leading manufacturer, the company employs a highly experienced and dedicated engineering team that excels in custom designs. MGM Transformers is committed to excellent quality and service, offering industry-leading lead times and exceptional customer service. MGM Transformers specializes… Read More…
