What Type of Projects Electrical Contractors Are Involved In
Related Articles
IDEAL Industries Hosts Support Ontario Youth’s Tools In The Trades Boot Camps
In Ajax, Ontario, Ideal Industries (Canada) Ltd. conducted an Electrical boot camp for Support Ontario Youth on September 17th.
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 2
In this second of a two-part series, we continue discussing options to consider when designing a cable assembly or wire harness, such as the best materials to use to meet the expectations of the assembly installation, the proper termination method for the type of signal that will be transmitted over the assembly, and what safety certifications the assembly will need to comply with based on the environment. Here in Part 2: conductor twisting/cabling, shielding, outer sheaths, connectors/strain reliefs, and safety certification.
Reality Checks
Sometimes life throws you a curveball. On occasion they are subtle, nudging you in a different direction or providing you an additional option when you are in the process of making a decision.
Years of Experience for Manufacturing Engineers
This graph shows years of experience for manufacturing engineers by percentage. 52.4% of those surveyed are early career to entry level. Only 9.3% are at the late career state.
The Wild and Wonderful of Thermal by FLIR – How Thermal Imaging is Augmenting More Than Just Cameras
May 5, 2025 By Krystie Johnston Teledyne FLIR OEM launched their Thermal by FLIR about six years ago, to expand support for original equipment manufacturers (OEMs) who integrate FLIR thermal camera technology into their products. Since then, these collaborations have taken thermal into completely new spaces. Mike Walters, Vice President of Emerging Product Management at FLIR…
IDEAL Industries Hosts Support Ontario Youth’s Tools In The Trades Boot Camps
In Ajax, Ontario, Ideal Industries (Canada) Ltd. conducted an Electrical boot camp for Support Ontario Youth on September 17th.
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 2
In this second of a two-part series, we continue discussing options to consider when designing a cable assembly or wire harness, such as the best materials to use to meet the expectations of the assembly installation, the proper termination method for the type of signal that will be transmitted over the assembly, and what safety certifications the assembly will need to comply with based on the environment. Here in Part 2: conductor twisting/cabling, shielding, outer sheaths, connectors/strain reliefs, and safety certification.
Reality Checks
Sometimes life throws you a curveball. On occasion they are subtle, nudging you in a different direction or providing you an additional option when you are in the process of making a decision.
Years of Experience for Manufacturing Engineers
This graph shows years of experience for manufacturing engineers by percentage. 52.4% of those surveyed are early career to entry level. Only 9.3% are at the late career state.
The Wild and Wonderful of Thermal by FLIR – How Thermal Imaging is Augmenting More Than Just Cameras
May 5, 2025 By Krystie Johnston Teledyne FLIR OEM launched their Thermal by FLIR about six years ago, to expand support for original equipment manufacturers (OEMs) who integrate FLIR thermal camera technology into their products. Since then, these collaborations have taken thermal into completely new spaces. Mike Walters, Vice President of Emerging Product Management at FLIR…
IDEAL Industries Hosts Support Ontario Youth’s Tools In The Trades Boot Camps
In Ajax, Ontario, Ideal Industries (Canada) Ltd. conducted an Electrical boot camp for Support Ontario Youth on September 17th.
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 2
In this second of a two-part series, we continue discussing options to consider when designing a cable assembly or wire harness, such as the best materials to use to meet the expectations of the assembly installation, the proper termination method for the type of signal that will be transmitted over the assembly, and what safety certifications the assembly will need to comply with based on the environment. Here in Part 2: conductor twisting/cabling, shielding, outer sheaths, connectors/strain reliefs, and safety certification.
Reality Checks
Sometimes life throws you a curveball. On occasion they are subtle, nudging you in a different direction or providing you an additional option when you are in the process of making a decision.
Years of Experience for Manufacturing Engineers
This graph shows years of experience for manufacturing engineers by percentage. 52.4% of those surveyed are early career to entry level. Only 9.3% are at the late career state.
The Wild and Wonderful of Thermal by FLIR – How Thermal Imaging is Augmenting More Than Just Cameras
May 5, 2025 By Krystie Johnston Teledyne FLIR OEM launched their Thermal by FLIR about six years ago, to expand support for original equipment manufacturers (OEMs) who integrate FLIR thermal camera technology into their products. Since then, these collaborations have taken thermal into completely new spaces. Mike Walters, Vice President of Emerging Product Management at FLIR…
Latest Articles
-
Industrial Wiring Devices: A Brief Intro and How to Choose Them
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
-
Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
-
Code Quiz: Canadian Electrical Code, Part 1, 26th Edition Section 28 – Motors and Generators
by William (Bill) Burr Question: Adam is working in his garage cutting wood on his table saw. Suddenly the lights go out and the sump pump and the table saw stop running. There is obviously a power outage. After a short time, the lights and the sump pump come back on, but thetable saw stays off. Adam needs to restart it. Can you explain why the lights and sump pump come back on… Read More…
Changing Scene
-
Andrey Goreev Joins Mersen Electrical Power as Regional Sales Manager
June 9, 2025 MERSEN CANADA TORONTO INC. is pleased to announce effective June 2nd, 2025, Andrey Goreev has joined Mersen Electrical Power as Regional Sales Manager for the Western Canada Region. He will report to Tom Arbanas, Vice President of Distribution Sales and Customer Care, Canada. Andrey has over 18 years of experience in industrial… Read More…
-
Electric Avenue Powers Ahead with Major Win and New Flagship Product: Watti Pro Echo
June 9, 2025 In an industry dominated by global giants, a startup from Canada’s East Coast is quickly becoming one of the most compelling cleantech success stories in the country. Electric Avenue, a Nova Scotia–based EV charging manufacturer, is making waves in the North American market with the official launch of its Watti Pro Echo… Read More…
-
Manitoba and BC Establish Free Trade Agreements
June 9, 2025 The Manitoba government will sign a new memorandum of understanding with British Columbia to advance free trade between the two provinces and cabinet will pass regulations by July 1 to ensure mutual recognition of other provinces by Canada Day, Premier Wab Kinew announced today at the MBiz Breakfast Series hosted by the… Read More…
-
Nova Scotia Removing Trade Barriers With Other Provinces, Federal Government
June 9, 2025 Trade barriers between Nova Scotia, several provinces and the federal government will soon be removed. Nova Scotia, along with Alberta, British Columbia, Manitoba, Ontario and Prince Edward Island have taken action to remove barriers and red tape that will open up new trade and investment opportunities. It is also anticipated that the… Read More…
