Key Buying Factors for Contractors with Fewer Than 15 Employees
Related Articles
Electrical Inspections with a Thermal Camera
Infrared thermal cameras are a great additional to a preventive maintenance program. They’re easy to use and can help you find where issues are within your electrical system. Thermal cameras often have a point-and-shoot design with the IR image displayed on a screen on the back of the camera.
Arc Flash and Shock Hazards, CSA Z462 and IEEE 1584 — Getting It Right!
I was reminded again over the past few weeks in working with clients on electrical safety program development, following up on LinkedIn posts, and reviewing IEEE 1584 based arc flash hazard incident energy analysis study P.Eng. reports for clients that industry doesn’t understand the CSA Z462 Workplace electrical safety standard…
Sonepar Partners with Design de Plume on Land Acknowledgement
November 24, 2023 Sonepar Canada announced on its LinkedIn page that it has partnered with a women-led, indigenous-owned design team, Design de Plume Inc. to create a four-piece art collection to acknowledge the land that their head offices are built upon. “At Sonepar, we are committed to fostering a trusted partnership with Indigenous communities across Canada….
STANDATA Variance: National Fire Code 2019, Alberta Edition
January 9, 2023 Municipal Affairs and the Safety Codes Council develop Alberta Fire Code STANDATA jointly. Some are issued as province-wide variances or interpretations. Others are information bulletins that provide general advice on related matters. New STANDATA are added on a regular basis. UPDATED December 16, 2022 Go HERE to view all the new STANDATA…
Electrical Inspections with a Thermal Camera
Infrared thermal cameras are a great additional to a preventive maintenance program. They’re easy to use and can help you find where issues are within your electrical system. Thermal cameras often have a point-and-shoot design with the IR image displayed on a screen on the back of the camera.
Arc Flash and Shock Hazards, CSA Z462 and IEEE 1584 — Getting It Right!
I was reminded again over the past few weeks in working with clients on electrical safety program development, following up on LinkedIn posts, and reviewing IEEE 1584 based arc flash hazard incident energy analysis study P.Eng. reports for clients that industry doesn’t understand the CSA Z462 Workplace electrical safety standard…
Sonepar Partners with Design de Plume on Land Acknowledgement
November 24, 2023 Sonepar Canada announced on its LinkedIn page that it has partnered with a women-led, indigenous-owned design team, Design de Plume Inc. to create a four-piece art collection to acknowledge the land that their head offices are built upon. “At Sonepar, we are committed to fostering a trusted partnership with Indigenous communities across Canada….
STANDATA Variance: National Fire Code 2019, Alberta Edition
January 9, 2023 Municipal Affairs and the Safety Codes Council develop Alberta Fire Code STANDATA jointly. Some are issued as province-wide variances or interpretations. Others are information bulletins that provide general advice on related matters. New STANDATA are added on a regular basis. UPDATED December 16, 2022 Go HERE to view all the new STANDATA…
Electrical Inspections with a Thermal Camera
Infrared thermal cameras are a great additional to a preventive maintenance program. They’re easy to use and can help you find where issues are within your electrical system. Thermal cameras often have a point-and-shoot design with the IR image displayed on a screen on the back of the camera.
Arc Flash and Shock Hazards, CSA Z462 and IEEE 1584 — Getting It Right!
I was reminded again over the past few weeks in working with clients on electrical safety program development, following up on LinkedIn posts, and reviewing IEEE 1584 based arc flash hazard incident energy analysis study P.Eng. reports for clients that industry doesn’t understand the CSA Z462 Workplace electrical safety standard…
Sonepar Partners with Design de Plume on Land Acknowledgement
November 24, 2023 Sonepar Canada announced on its LinkedIn page that it has partnered with a women-led, indigenous-owned design team, Design de Plume Inc. to create a four-piece art collection to acknowledge the land that their head offices are built upon. “At Sonepar, we are committed to fostering a trusted partnership with Indigenous communities across Canada….
STANDATA Variance: National Fire Code 2019, Alberta Edition
January 9, 2023 Municipal Affairs and the Safety Codes Council develop Alberta Fire Code STANDATA jointly. Some are issued as province-wide variances or interpretations. Others are information bulletins that provide general advice on related matters. New STANDATA are added on a regular basis. UPDATED December 16, 2022 Go HERE to view all the new STANDATA…
Latest Articles
-
New Gender Equality Report Card Shows Most Jurisdictions are Failing
November 10, 2025 The Canadian Coalition of Women in Engineering, Science, Trade and Technology (CCWESTT) has just released the first Gender Equality Report Card, which provides comprehensive, evidence-based insight into the state of gender equality across Canada’s provinces and territories in science, engineering, trades and technology (SETT) workplaces. The report draws on 18 participatory research… Read More…
-
![Guide to the Canadian Electrical Code, Part 1[i] 26th Edition – A Road Map: Section 46](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i] 26th Edition – A Road Map: Section 46
November 10, 2025 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendices B and… Read More…
-
Calgary Project Transforms Office Building into Energy Efficient Housing
November 10, 2025 More than 200 Calgarians now have new homes in Downtown West as the former Dominion Centre office reopens as Dominion Civic Apartments. The former Dominion Centre has been transformed from 100,000 square feet of vacant office space to an energy efficient and climate resilient residential building with 132 modern rental suites. The… Read More…
-
Remembering Katy Shebath, A Kind And Thoughtful Leader
November 10, 2025 By Stanpro Katy Shebath played a critical role alongside her brother, David Nathaniel, throughout the last 32 years of Standard Products journey. She remains, with David, the heart and soul of this company. A Driving Force Behind STANDARD When Katy joined STANDARD in 1986, she took on the administration of the company. At… Read More…
Changing Scene
-
A Groundbreaking Return to the Sir Robert Peel Centre for Ellis Don
November 10, 2025 In a full circle moment, EllisDon has broken ground on the Sir Robert Peel Centre Redevelopment Project, a facility originally constructed by EllisDon in the 1980s. Now, this milestone marks the beginning of a new chapter in Peel Region’s public safety infrastructure. The redevelopment will deliver a modern, high-performance policing hub designed… Read More…
-
BCCA Response to Federal Budget 2025
November 10, 2025 The BCCA welcomes the federal government’s investments into construction and infrastructure in Budget 2025. The budget includes increasing Canada Infrastructure Bank funding by $10 billion and funding the new Major Projects Office to the tune of $213.8 million over 5 years. The BCCA also supports the government’s investment into the construction workforce,… Read More…
-
Government of Canada Releases Budget 2025
November 10. 2025 Canada faces a rapidly changing and increasingly uncertain world. The rules-based international order and the trading system that powered Canada’s prosperity for decades are being reshaped – hurting companies, displacing workers, causing major disruption and upheaval for Canadians. In the face of global uncertainty, Canada’s new government is focused on what we… Read More…
-
CME: Budget 2025 Delivers Key Gains for Manufacturers Facing Tariff Pressures, but Canada Still Needs Deeper Competitiveness Reforms
November 10, 2025 Canadian Manufacturers & Exporters (CME) applauds Budget 2025 for recognizing the serious challenges facing Canada’s economy amid ongoing U.S. trade actions and for introducing new incentives to spur investment. “This budget takes meaningful steps to support manufacturers under pressure and acknowledges the critical role our sector plays in Canada’s economic future,” said… Read More…
