Where Electrical Technologists and Technicians Work
April 4 2016
Among nine categories, manufacturing employs one in 3, twice as much as the next highest category.
Source: Service Canada: www.servicecanada.gc.ca.
Related Articles
Advanced Charging Solutions for Next-Gen Commercial EVs
November 24, 2022 Three scenarios with dedicated power electronic solutions As the electrification of heavy-duty or commercial vehicles gains more acceptance, charging larger batteries than the ones in electric passenger cars increases in importance. Because time is money, especially in logistics, the preferred options are increasing charging power or assigning idle times for charging. These…
Contractors’ Average Salaries by Company Size
The largest companies pay the most. In 2016, there was a $28,000 spread between the largest and smallest employers.
4 in 5 Canadians See Electrifying Public Transit as Key to Advancing Climate Action, Schneider Electric Survey Finds
December 13, 2024 Schneider Electric has released new survey findings showing Canadians are increasingly concerned about the environmental impact of traditional public transit emissions. According to the survey, 83 per cent of Canadians recognize the need for electrified transit to support a sustainable future and are seeking actionable and innovative solutions to ease the nation’s…
Canem Systems President & COO John Krill on Leadership, Growth, and Strength in Diversity
John Krill has been in the energy and construction industries for 35-years, now he serves as Canem Systems’ President and COO. In the energy sector he has experience in natural gas and electrical utilities…
Littelfuse Paper Examines Electrical Shock Hazards and Prevention Through Design with GFCIs
Littelfuse, Inc., has released the technical paper “Prevention Through Design with Special-Purpose Ground-Fault Circuit Interrupters (GFCIs)” describing the hazards of electrical shock and the best prevention methods and products that help keep workers safe from serious injuries and death caused by electrical shock.
EPA and the ABCs of Wind Safety: Calculating the Safest Way to Light Outdoor Areas Using EPA
The design of outdoor architectural fixtures requires the consideration of multiple environmental factors. These include such validations as Impact Protection (IK), Ingress Protection (IP), and tested operating temperatures.
Advanced Charging Solutions for Next-Gen Commercial EVs
November 24, 2022 Three scenarios with dedicated power electronic solutions As the electrification of heavy-duty or commercial vehicles gains more acceptance, charging larger batteries than the ones in electric passenger cars increases in importance. Because time is money, especially in logistics, the preferred options are increasing charging power or assigning idle times for charging. These…
Contractors’ Average Salaries by Company Size
The largest companies pay the most. In 2016, there was a $28,000 spread between the largest and smallest employers.
4 in 5 Canadians See Electrifying Public Transit as Key to Advancing Climate Action, Schneider Electric Survey Finds
December 13, 2024 Schneider Electric has released new survey findings showing Canadians are increasingly concerned about the environmental impact of traditional public transit emissions. According to the survey, 83 per cent of Canadians recognize the need for electrified transit to support a sustainable future and are seeking actionable and innovative solutions to ease the nation’s…
Canem Systems President & COO John Krill on Leadership, Growth, and Strength in Diversity
John Krill has been in the energy and construction industries for 35-years, now he serves as Canem Systems’ President and COO. In the energy sector he has experience in natural gas and electrical utilities…
Littelfuse Paper Examines Electrical Shock Hazards and Prevention Through Design with GFCIs
Littelfuse, Inc., has released the technical paper “Prevention Through Design with Special-Purpose Ground-Fault Circuit Interrupters (GFCIs)” describing the hazards of electrical shock and the best prevention methods and products that help keep workers safe from serious injuries and death caused by electrical shock.
EPA and the ABCs of Wind Safety: Calculating the Safest Way to Light Outdoor Areas Using EPA
The design of outdoor architectural fixtures requires the consideration of multiple environmental factors. These include such validations as Impact Protection (IK), Ingress Protection (IP), and tested operating temperatures.
Advanced Charging Solutions for Next-Gen Commercial EVs
November 24, 2022 Three scenarios with dedicated power electronic solutions As the electrification of heavy-duty or commercial vehicles gains more acceptance, charging larger batteries than the ones in electric passenger cars increases in importance. Because time is money, especially in logistics, the preferred options are increasing charging power or assigning idle times for charging. These…
Contractors’ Average Salaries by Company Size
The largest companies pay the most. In 2016, there was a $28,000 spread between the largest and smallest employers.
4 in 5 Canadians See Electrifying Public Transit as Key to Advancing Climate Action, Schneider Electric Survey Finds
December 13, 2024 Schneider Electric has released new survey findings showing Canadians are increasingly concerned about the environmental impact of traditional public transit emissions. According to the survey, 83 per cent of Canadians recognize the need for electrified transit to support a sustainable future and are seeking actionable and innovative solutions to ease the nation’s…
Canem Systems President & COO John Krill on Leadership, Growth, and Strength in Diversity
John Krill has been in the energy and construction industries for 35-years, now he serves as Canem Systems’ President and COO. In the energy sector he has experience in natural gas and electrical utilities…
Littelfuse Paper Examines Electrical Shock Hazards and Prevention Through Design with GFCIs
Littelfuse, Inc., has released the technical paper “Prevention Through Design with Special-Purpose Ground-Fault Circuit Interrupters (GFCIs)” describing the hazards of electrical shock and the best prevention methods and products that help keep workers safe from serious injuries and death caused by electrical shock.
EPA and the ABCs of Wind Safety: Calculating the Safest Way to Light Outdoor Areas Using EPA
The design of outdoor architectural fixtures requires the consideration of multiple environmental factors. These include such validations as Impact Protection (IK), Ingress Protection (IP), and tested operating temperatures.
Latest Articles
-
Industrial Wiring Devices: A Brief Intro and How to Choose Them
June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…
-
Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience
June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…
-
Electrifying Connections: A Celebration of Legacy, A Vision for the Future
June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections. The energy and… Read More…
-
Code Quiz: Canadian Electrical Code, Part 1, 26th Edition Section 28 – Motors and Generators
by William (Bill) Burr Question: Adam is working in his garage cutting wood on his table saw. Suddenly the lights go out and the sump pump and the table saw stop running. There is obviously a power outage. After a short time, the lights and the sump pump come back on, but thetable saw stays off. Adam needs to restart it. Can you explain why the lights and sump pump come back on… Read More…
Changing Scene
-
Andrey Goreev Joins Mersen Electrical Power as Regional Sales Manager
June 9, 2025 MERSEN CANADA TORONTO INC. is pleased to announce effective June 2nd, 2025, Andrey Goreev has joined Mersen Electrical Power as Regional Sales Manager for the Western Canada Region. He will report to Tom Arbanas, Vice President of Distribution Sales and Customer Care, Canada. Andrey has over 18 years of experience in industrial… Read More…
-
Electric Avenue Powers Ahead with Major Win and New Flagship Product: Watti Pro Echo
June 9, 2025 In an industry dominated by global giants, a startup from Canada’s East Coast is quickly becoming one of the most compelling cleantech success stories in the country. Electric Avenue, a Nova Scotia–based EV charging manufacturer, is making waves in the North American market with the official launch of its Watti Pro Echo… Read More…
-
Manitoba and BC Establish Free Trade Agreements
June 9, 2025 The Manitoba government will sign a new memorandum of understanding with British Columbia to advance free trade between the two provinces and cabinet will pass regulations by July 1 to ensure mutual recognition of other provinces by Canada Day, Premier Wab Kinew announced today at the MBiz Breakfast Series hosted by the… Read More…
-
Nova Scotia Removing Trade Barriers With Other Provinces, Federal Government
June 9, 2025 Trade barriers between Nova Scotia, several provinces and the federal government will soon be removed. Nova Scotia, along with Alberta, British Columbia, Manitoba, Ontario and Prince Edward Island have taken action to remove barriers and red tape that will open up new trade and investment opportunities. It is also anticipated that the… Read More…
