Contractor Bonuses By Job

To hear Standard Products Inc. President and CEO David Nathaniel tell the story of this family business, you have a sense of going back decades. However, it’s a contemporary story that finally looks a bit like that of the technologies that have accompanied the business along the way.
After eight months, 263 events, 17 broken clocks, and thousands of competitors, Ideal Industries’ 2018 National Championship Qualifying Round in Canada came to an end last October, and the Third Annual Ideal National Skills Competition took place December 1-3 in Orlando, Florida.
This graph shows years of experience by percentage for transmission line engineers, 75% of those surveyed working as transmission line engineers have less than 10 years of experience, which may bode well for the industry moving forward.
The National Electrical Manufacturers Association (NEMA) has published ANSI/NEMA WC 57/ICEA S-73-532-2014 American National Standard For Control, Thermocouple Extension, and Instrumentation Cables. This standard applies to materials, construction, and testing of multiconductor control, thermocouple extension, and instrumentation cables rated up to and including 125°C. Users and producers of insulated cable will find this standard useful.
All dimmers are created equal, right? Wrong! All drivers are created equal, right? Wrong! It’s not sufficient to say that you want fixtures to be “dimmable.” There have always been variations in how different dimmers work, and fluorescent ballasts, and more recently LED drivers.
Investment in non-residential building construction totalled $12.3 billion in the fourth quarter, down 0.7% from the previous quarter. This marks the seventh decrease in eight quarters. Nationally, the decline reflected lower spending on commercial and industrial building construction.
To hear Standard Products Inc. President and CEO David Nathaniel tell the story of this family business, you have a sense of going back decades. However, it’s a contemporary story that finally looks a bit like that of the technologies that have accompanied the business along the way.
After eight months, 263 events, 17 broken clocks, and thousands of competitors, Ideal Industries’ 2018 National Championship Qualifying Round in Canada came to an end last October, and the Third Annual Ideal National Skills Competition took place December 1-3 in Orlando, Florida.
This graph shows years of experience by percentage for transmission line engineers, 75% of those surveyed working as transmission line engineers have less than 10 years of experience, which may bode well for the industry moving forward.
The National Electrical Manufacturers Association (NEMA) has published ANSI/NEMA WC 57/ICEA S-73-532-2014 American National Standard For Control, Thermocouple Extension, and Instrumentation Cables. This standard applies to materials, construction, and testing of multiconductor control, thermocouple extension, and instrumentation cables rated up to and including 125°C. Users and producers of insulated cable will find this standard useful.
All dimmers are created equal, right? Wrong! All drivers are created equal, right? Wrong! It’s not sufficient to say that you want fixtures to be “dimmable.” There have always been variations in how different dimmers work, and fluorescent ballasts, and more recently LED drivers.
Investment in non-residential building construction totalled $12.3 billion in the fourth quarter, down 0.7% from the previous quarter. This marks the seventh decrease in eight quarters. Nationally, the decline reflected lower spending on commercial and industrial building construction.
To hear Standard Products Inc. President and CEO David Nathaniel tell the story of this family business, you have a sense of going back decades. However, it’s a contemporary story that finally looks a bit like that of the technologies that have accompanied the business along the way.
After eight months, 263 events, 17 broken clocks, and thousands of competitors, Ideal Industries’ 2018 National Championship Qualifying Round in Canada came to an end last October, and the Third Annual Ideal National Skills Competition took place December 1-3 in Orlando, Florida.
This graph shows years of experience by percentage for transmission line engineers, 75% of those surveyed working as transmission line engineers have less than 10 years of experience, which may bode well for the industry moving forward.
The National Electrical Manufacturers Association (NEMA) has published ANSI/NEMA WC 57/ICEA S-73-532-2014 American National Standard For Control, Thermocouple Extension, and Instrumentation Cables. This standard applies to materials, construction, and testing of multiconductor control, thermocouple extension, and instrumentation cables rated up to and including 125°C. Users and producers of insulated cable will find this standard useful.
All dimmers are created equal, right? Wrong! All drivers are created equal, right? Wrong! It’s not sufficient to say that you want fixtures to be “dimmable.” There have always been variations in how different dimmers work, and fluorescent ballasts, and more recently LED drivers.
Investment in non-residential building construction totalled $12.3 billion in the fourth quarter, down 0.7% from the previous quarter. This marks the seventh decrease in eight quarters. Nationally, the decline reflected lower spending on commercial and industrial building construction.
July 24, 2025 ESA Technical Advisor, Trevor Tremblay, reveals how meter bases can go from simple to seriously risky if installed incorrectly. As code enforcement around meter bases ramps up, contractors must stay sharp, read all rules carefully (especially those “notwithstanding” clauses), and double-check labeling. With the right education and planning, the transition can be… Read More…
July 24, 2025 Faced with growing pressure to build more, faster, nine in 10 leading Canadian construction companies agree the industry must quickly adopt new, cutting-edge technologies, with most saying digital tools are already starting to boost their productivity, according to a new report from KPMG in Canada on digital maturity in the construction industry. “It’s good… Read More…
July 21, 2025 The Home Renovation Savings™ program and make meaningful improvements today that pay off long term. Level up to a smart thermostat, invest in solar energy or install a heat pump. Smart upgrades like these can make your home more energy efficient, comfortable and ready for whatever the season brings. And best of… Read More…
July 21, 2025 Black & McDonald is proud to celebrate the remarkable sustainability achievements of Women’s College Hospital (WCH) — a dedicated member of the Greening Health Care (GHC) network, which supports healthcare facilities across North America in reducing energy use and greenhouse gas emissions. At this year’s GHC Summer Workshop, WCH was honored with… Read More…
July 24, 2025 BC Hydro is supporting the construction of new housing developments in growing communities by advancing changes to streamline upgrades and reducing the cost of new customer connections to BC Hydro’s electricity grid. “As communities across B.C. grow, so does the need for essential housing. We are committed to ensuring we’re ready to… Read More…
July 22, 2025 Building-Integrated Photovoltaics (BIPV) manufacturer, Mitrex proudly announces that its transformative SunRise Residential project in Edmonton, Alberta, has earned the Guinness World Record for the largest solar panel mural globally. This landmark project showcases Mitrex’s innovative BIPV solar panels, blending cutting-edge solar technology with vibrant cultural artistry to redefine sustainable architecture. Sustainable Architecture with BIPV Spanning over 30,000 square feet, the Mitrex eFacade PRO plus… Read More…
July 24, 2025 Nexans has reached a major milestone in its sustainability journey by developing a prototype cable made entirely from recycled materials — a first in the company’s history. This innovation combines technical performance, industrial feasibility, and a drastically reduced environmental footprint, marking a decisive step forward in circular economy. A cross-continental success story… Read More…
July 24, 2025 Since 1974, MGM Transformers has produced tough and trusted transformers designed to get the job done right. As a leading manufacturer, the company employs a highly experienced and dedicated engineering team that excels in custom designs. MGM Transformers is committed to excellent quality and service, offering industry-leading lead times and exceptional customer service. MGM Transformers specializes… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.