This heating cable is deal for floor warming and radiant heating in concrete and wood floor constructions. They are also used in snow melting installations, frost protection of roof, gutters, drains, pipe tracing and soil heating applications, where each radiant heating system is custom designed.
The heating cable units are ideal for floor warming and radiant heating in concrete and wood floor constructions. They are also used in snow melting installations, frost protection of roof, gutters, drains, pipe tacing and soil heating. Each unit has a unique factory made internal splice which is marked =>SPLICE<= on the cable surface. There is no need for a return conductor. The sealed end is 100% waterproof (factory made seal). The cold end is marked with snowflakes on the cable surface.
The DS-2B is the base model of the DS series. It is primarily designed for small satellite antenna/broadcast tower deicing, pavement snow melting applications, and use as a sensor for larger control systems. The unit may also be used as a stand-alone rain diversion controller for Ku band satellite applications.
Arlington’s recessed In Box Cover Kits offer the best way to install a receptacle in their FLBC4500 floor box for new concrete (sold separately) and other manufacturers’ boxes.
Arlington’s Countertop box kits with round plastic boxes and brass or nickel-plated trapdoor covers give you a parallel, great-looking installation and multiple options for installing a device in a countertop: an installed UL Listed tamper resistant decorator-style GFCI…a tamper resistant receptacle…or a TR receptacle with two USB ports.
Arlington’s new FLBC4502 4.5″ non-metallic concrete floor box has six conduit hubs and four plugs.
Designed for time-savings and a neat, flush installation, Arlington’s DROP IN FLOOR BOX installs in minutes with a single hole saw
Arlington’s non-metallic Mutli Purpose Box is the labor-saving solution to installing a fan, fixture or security camera inside or outside. There’s no need for time-consuming field modifications and it’s completely sealed so wiring stays dry. Supports fan or fixture up to 70 lbs securely in areas with open exposure to wind-driven rain and water spray.
Standard’s LSHOP series is an integrated solution for quick and easy installation; no wiring required, just plug it in and turn it on by pulling the chain. Equipped with a keyhole, it is the fastest way to surface mounts this workshop light.
LUBO Lighting International Inc. has a new generation of outdoor lighting fixtures with a thermo transfer module, for standard MR11 and MR16 bulbs, which transfer heat directly to the fixture’s body for fast dissipation.
Arlington’s Bare Wire Ground Clamp is made of solid brass with brass screws that is easy to install and use and fully CSA certified.
The Canadian Wire Connector Kit is ideal for service technicians and is easy to use and transport from job site to job site.
Electronic controllers for district heating and domestic hot water systems. The electronic controllers are intelligent temperature regulators which by means of weather compensation and application keys can be adapted to a variety of district heating systems, ensuring high comfort level and optimum energy utilization.
Nesco provides a wide range of explosion proof fittings for hazardous location sealing. The fittings are available in standard sizes for commercial and industrial applications.
Our uninterruptible power supplies for AC applications provide a pure sine curve at the output. Select your AC UPS – intelligent with IQ technology or space-saving with integrated energy storage.
Southwire’s SIM pull Copper RW90 is for open wiring and use in raceways (except cabletroughs and ventilated flexible cableways) in dry or wet locations. For open wiring exposed to the weather. Minimum recommended installation temperature minus 40°C (with suitable handling procedures). Maximum conductor temperature 90°C.
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.
