Canadian Electrical Industry News Week

 

Feb 12, 2016

Don Mackinnon EHRCCorenne Taylor, Kerrwil Publications

On December 9, 2015, Don MacKinnon, President of the Power Workers Union (PWU), was presented with Electricity Human Resources Canada (EHRC)’s prestigious 2015 Leader of the Year award. The award recognized efforts by MacKinnon and the PWU to develop the available talent pool of workers for the power industry and make the industry a more desirable career destination.

Electrical Industry News Week had an opportunity to speak with MacKinnon and discuss his thoughts on the state of the industry, current opportunities and challenges, and measures being taken to ensure power needs are met now and in the future.

Meet Don MacKinnon

Don MacKinnon started his career over four decades ago as a lineman (now referred to as a line tech) and throughout his career has used his inside perspective and personal experience to fight for workers’ rights and press for improvements within the industry.

As President, MacKinnon is responsible for leading the PWU and providing guidance on direction. However, he was quick to point out that it is a very democratic organization and he relies heavily on the strong leadership team in place in order to make the best possible strategic and directional decisions. The PWU was developed to represent power workers as well as drive innovation and improvements within the power industry itself. According to its website, the PWU is “committed to delivering a promising future for our membership and continuing to help keep the lights on for all Ontarians.”

MacKinnon’s early role as a lineman and the experiences he had are what eventually led him to his current role. When he began his career, safety standards were not nearly adequate to keep workers safe, and far too many lost limbs or even their lives. In the late 1970s, the provinces and federal government began passing legislation requiring joint health and safety committees and health and safety representatives, and this was a role MacKinnon knew he just had to be in. Since then, he has continued to campaign tirelessly for workers’ rights and improvements within the industry. While the pressing issues have evolved substantially over the past 40 years, much stills needs to change, says MacKinnon, and he and the PWU continue to fight for those changes.

Challenges and opportunities facing the power industry

MacKinnon expressed that he is very excited about the future of the power industry. He sees the role of power growing exponentially in the future, and anticipated a significant challenge in ensuring there are enough qualified workers to meet demand.

The PWU has worked with the industry to improve conditions within the industry and seen impressive progress. Over the past several decades, safety conditions have improved tremendously, as have working conditions and benefits, though MacKinnon mentions there are still strides to be made. While years ago the safety concerns centred around physical safety, mental health has cropped up as a new safety concern. The PWU is actively providing workers with education and information to highlight this concern as well as working to overcome the stigma prevalent in workplaces that mental health is not a serious or “real” safety concern.

Developing future talent

A career in the power industry has become desirable, challenging, and full of opportunity for advancement. One key challenge is communicating this to the general public. While substantial improvements have been made within the industry, it still remains a difficult sell to some parents to encourage or support their children to pursue such a path.
To address the power needs of tomorrow, MacKinnon and his team at PWU are putting in the groundwork today. The PWU has developed school outreach programs to improve the perception of a career in power as well as to inform members of the community that haven’t traditionally been attracted to the industry.

School programs

The PWU has launched programs to raise the profile of a career in power at both the post-secondary and elementary level. In high schools, the organization launched programs such as Trade Up in order to gain the support of guidance counsellors and teachers, who are in a position to encourage students to consider a career in the trades as a viable option to other traditional paths.

Partnerships have also been established with colleges, and a spin-off organization, PWU Training Inc., was established near Bruce Power so that students and apprentices could receive hands-on experience while they learned. The objective of these training programs is not only to provide real-world experience, but also to increase the prestige of the industry and the portability of skills through association with well-known colleges.

At the elementary level, programs that have been set up within Ontario’s Aboriginal communities encourage the development of future tradespeople and help those growing up in remote communities master the skill sets necessary to succeed in those careers. When looking to Aboriginal communities for talent, it was discovered that many weren’t acquiring the necessary educational prerequisites to enter the trades. Further inquiry uncovered that many of these children never learned to read and had difficulty seeing any kind of future for themselves, leaving them vulnerable to thoughts of suicide. The PWU supported a program spearheaded by then Lieutenant Governor of Ontario James Bartleman to establish reading camps within First Nation communities to develop reading skills, provide life skills and, more importantly, encourage hope in these children.

Started almost a decade ago, the program has seen much success, most notably in a substantial decrease in child suicide.

Alternative talent pools

According to MacKinnon, the PWU is heavily invested in developing talent among women, Aboriginals, and the Armed Forces. In particular, the Armed Forces presents a great opportunity as many returning from service have skills that map nicely onto the needs of the power industry and are looking for careers that capitalize on the skills they acquired in service. Women and Aboriginals also present an attractive selection of talent for different reasons. Women were not traditionally drawn to the trades in the past as these types of careers were seen as more male-oriented. However, this perception is breaking down as more women enter the industry. Aboriginals living in remote communities tended to lack the educational prerequisites needed to pursue a career in the trades, something the PWU and others are trying to address with reading and outreach programs.

Final thoughts on the 2015 Leader of the Year award

As a closing question, Electrical Industry Canada asked MacKinnon if he felt he deserved the 2015 Leader of the Year award. His answer was two-fold. He was very happy and humbled to have received the award and was glad for the recognition it brought to the PWU and the great work it has done. However, he made it very clear that this win was not a win for him, it was a win for his team and the PWU as a whole, and it was each and every person who works tirelessly at the PWU to advance the rights of workers who truly won the award.


Read more on Don MacKinnon in EIN.

 

Changing Scene

  • Prev
  Electro-Federation Canada (EFC) and its members are proud to support Canadian university ...
  In the context of the energy transition currently unfolding where reducing greenhouse gas ...
  Nova Scotia Power plans to put the power in our customers’ hands by introducing ...
  Ontario's soaring electricity bills have driven numerous factories out of the province ...
CSA Group has announced that Shawn Paulsen, Manager of Conformity Assessment, CSA Group, has been ...
For the fifth consecutive year, Rittal Systems Ltd., is being certified as a Great Workplace ...
  A contract worker received an electrical shock after coming into direct contact with ...
  Rittal Systems has announced Franklin Empire has joined its distribution/partner network ...
  FortWhyte Alive is unveiling the largest solar installation in the City of Winnipeg. ...
  In partnership with TM4 Inc. and Cummins Inc., STL recently announced plans to test two ...

Irwin Beron RAB Design has announced the retirement of President, Irwin Beron.  After 50 years in the lighting industry, Irwin has decided to step down as President and hand over the reins to his eldest son, David Beron.  David will assume the position of President, effective immediately.  Irwin will remain on as Chairman, which will allow him to enjoy some well-deserved rest and relaxation with his lovely wife Lynette and seven grandchildren, yet still free to impart his many years of experience and expertise whenever possible as Chairman of RAB Design. Irwin has been serving as President of RAB Design Lighting since 2002.  He acquired the company during a difficult period and through grit, determination and hard work, turned it around to make it one of Canada’s most respected lighting companies.

 

Read More: Irwin Beron Retires as President of RAB Design... 

 

 

 

Electricians Provide Assistance in TD Centre's 50th Anniversary Illumination Project

Contractors Guild, Ainsworth, Symtech, Plan and ACML donated their services to temporarily reconfigure the buildings' automated lighting systems, while a crew of staff and volunteers worked to open and close blinds on over 6,000 windows across the TD Centre's five towers to create the message "Less is more or" in 100-foot-tall lights.

A media statement called it the largest public art project of its kind undertaken anywhere in the world.

Read more: Electricians Provide Assistance...

 

Codes and Regulations Brought to You by the CSA Group

  • Prev
In this article: Section 58 — Passenger Ropeways and Similar Equipment. Rule 58-000 ...
  Unauthorized CSA Group certification marks have been found on wiring by Triumph Cable ...
In this article: Section 52 — Diagnostic imaging installations. The CE code is a ...
In this article: Section 46 — Emergency Power Supply, Unit Equipment, Exit Signs, and ...
  In this article: Section 44 — Theatre Installations. The CE Code is a ...
CSA has published C22.2 No. 60947-7-3, the harmonized standard for low-voltage switchgear and ...
  Electric welders. The CE Code is a comprehensive document. Sometimes it can seem ...
  In this article: Section 40 — Electric cranes and hoists. The CE Code is a ...

CSA

 

By William (Bill) Burr

In this article: Section 56 — Optical fibre cables. Section 56 is a supplementary or amendatory section of the code and applies to the installation of optical fibre cables in conjunction with all other electrical systems. Rule 56-002 provides a special terminology definition for an Optical Fibre Cable — a cable consisting of one or more optical fibres that transmits modulated light for the purpose of control, signalling or communications.

Rule 56-102 outlines that there are three types of optical fibre cables.



Tools for the Trade

  • Prev
  Ideal Industries' 26 piece insulated Journeyman kit is ideal for new electricians or for ...
  Klein Tools Deluxe Fish Rod Set comes in 19 pieces that when assembled can fish wire and ...
  BendWorks Software was designed to help electrical contractors adopt this new process ...
  This new lock box is ideal for group lockout situations with multiple isolation points ...
  Greenlee has taken their standard storage boxes to the next level with the limited ...
  The SureTest circuit analyzers "look behind walls" to identify wiring problems that can ...
  The Ideal Dispenser is equipped with high-quality adhesive and 3 mil thickness that ...
  The Adjustable cable stripping tool has an intuitive blade design that allows users to ...
  The SIMpull CoilPAK completes the SIMpull Circuit Management System, taking heavy, ...
  The Javelin is a new product that makes drilling holes through stud walls easier. ...

Product News

  • Prev
  Liteline's LUNA is engineered for maximum heat dissipation and eliminates the need ...
Magic Lite 2013 Ltd. has announced a new selection of decorative lighting options for a multitude ...
  Arlington’s recessed In Box Cover Kits offer the best way to install a receptacle ...
  Arlington’s Countertop box kits with round plastic boxes and brass or nickel-plated ...
  Arlington’s new FLBC4502 4.5" non-metallic concrete floor box has six conduit ...
  Designed for time-savings and a neat, flush installation, Arlington’s DROP IN ...
  Arlington’s non-metallic Mutli Purpose Box is the labor-saving solution to ...
Standard's LSHOP series is an integrated solution for quick and easy installation; no wiring ...
  LUBO Lighting International Inc. has a new generation of outdoor lighting fixtures with a ...
  Arlington's Bare Wire Ground Clamp is made of solid brass with brass screws that is easy ...

 

Peers & Profiles

  • Prev
Andrew MacLeod is a territory sales manager with Leviton Manufacturing of Canada in British ...
  Floyd Lau founded Amptek Technologies in 2002 as an end to end engineering design ...
Mike Marsh, President and CEO of SaskPower, has been a leading figure in Saskatchewan’s ...
Gordon MacDonald is a cheerful, driven individual who loves to be challenged, a trait that suits ...
  Most of us have a difficult enough time managing one job and a home life. However, some ...
  Since 2012 Barnstormer has advanced the abilities of their brewery with the installation ...
  Electrical Industry Canada was recently given the unique opportunity to see ...
  Vickery Electric has been providing electrical services to the Whitby area since 1923, ...
Safety standards in the electrical industry are constantly evolving, which requires that ...
Newman Electric was founded in 1995 and has established itself as a leading electrical contractor ...

Copper $US Dollar price per pound

Gordon M

 Gordon MacDonald is a cheerful, driven individual who loves to be challenged, a trait that suits him well as a lighting specialist overseeing retrofit projects for Rexel in New Brunswick and P.E.I. He also has had a unique introduction to the field he now works in. 

Gordon was born and raised in Moncton, New Brunswick and has lived there for most of his life. He has an incredibly busy home life that extends to his children, stepchildren and grandchildren. Beyond family life he enjoys “playing guitar and piano, going target shooting, cooking BBQ, trying new foods and learning new things.”

How One Hospital Is Improving Patient Care with Advanced Analytics Demand for healthcare is outstripping capacity, but Toronto’s Humber River Hospital has a solution: a digital Command Centre powered by GE’s Wall of Analytics. As populations grow and age, many hospitals are being stretched past their limits. Rather than apply temporary or partial fixes to address the challenges that underlie this busy, acute care hospital, Toronto’s Humber River Hospital has chosen to implement a holistic, state-of-the-art hospital command centre that will enable it to achieve radical gains in quality and efficiency.

The hospital partnered with GE Healthcare Partners to conceive, design and build the new 4,500 square-foot command centre, a cornerstone of which will be GE’s Wall of Analytics that processes real-time data from multiple source systems across the hospital.

Read more: How One Hospital is ...

 

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
2016 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil