July 22, 2020
The Green Cable Surface is synonymous with flexibility. Its small diameter and pliability make it the perfect cable to be installed in big or small rooms and rooms with nooks and crannies where it will have to go around obstacles. Since it can be installed with traditional gauges or Flextherm’s FLEXSnap+ installation system, it lends itself perfectly to every project.
Go HERE for more information
EarthTronics now offers a complete line of T5, T8 slamp solutions for use directly with existing fluorescent ballast systems and Type B direct wire or ballast by-pass LED tubes. Available in stock, the new products provide an energy-saving solution for commercial, municipal, school and university building retrofit applications.
This LED downlight is offered in 4, 6, or 8 inch sizes and in a variety of reflectors and baffles to fit seamlessly into any decor. As it operates on a 0 to 10V dimming system, it is best suited to commercial applications.
Liteline’s NEW SlimLED Puck is Liteline’s most straightfoward puck. With the flexibility to link up to 10 fixtures together and easily swap the color trim on-site, the SlimLED Puck is thin enough to surface mount, and available for recess installation.
The ESA Series of adjustable and wall-wash lighting, with impressive lumen packages beyond 5,000 initial lumens delivered…
The Halo light fixture is made from aluminum with a painted white interior to allow for optimal light radiance and glow. The Halo uses only high output LEDs, yet due to its design, can offer a soft, ambient effect.
Arlington’s Grounding Electrode Connectors offer flexibility, convenience, and cost savings. These TWO connectors accommodate a wider range of grounding electrodes, from #8 to 3/0 conductors. They install from outside or inside a metal panel or metal enclosure, through one of the existing knockouts. There’s no need to modify the box or enclosure to accommodate the connector. They also provide excellent strain relief for grounding conductors.
November 18, 2024 Technical Advisor Diana Madill shares her inspiring career journey from electrician to inspector and how she overcame challenges as a woman in the trade. If you’ve ever wondered about becoming an Electrical Safety Authority (ESA) inspector, Diana Madill has a path she encourages you to follow. From her humble beginnings inspired by… Read More…
November 18, 2024 On November 7th, the YPN Quebec Region hosted its last 2024 event, the YPN Panel discussion. The panel discussion was moderated by Marcos Simard of Wesco, President of the Quebec YPN Committee. Three leaders from the electrical industry, Gilles Motard, VP operation, Lumen, Corinne Galarneau, company VP, Agence Ricard, Stéphanie Santini, VP… Read More…
The Electrical Safety Authority would like to advise that, following robust consultation, the Minister of Public and Business Service Delivery and Procurement has approved the regulatory amendment to adopt the 2024 Ontario Electrical Safety Code (OESC), which comes into effect on May 1, 2025. Read More…
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 22](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Rule 22-000 outlinesthe Scope of Section 22 and that it amends or supplements the general requirements of the code. It provides specific rules for locations classified as Category 1 (moisture) or Category 2 (corrosive) environments that are significant enough to interfere with normal operation of electrical equipment. Read More…
November 18, 2024 The federal government is providing nearly $364 million to help build 989 new homes in Montreal. The announcement took place at 5200 rue de la Savane, in Montreal, which received $100 million dollars through the Apartment Loan Construction Program (ACLP) to build 303 homes and will be operated by Olymbec. This rental building, named Lynk, is designed to… Read More…
November 18, 2024 ABB completed the previously announced 50/50 joint venture with Niedax Group. The Abnex Inc. joint venture (JV) will broaden solutions and advance opportunities in the rapidly growing North American cable management market. Integrating engineering and manufacturing capabilities of ABB’s Installation Products Division with Niedax Group will enable the newly formed company to deliver a… Read More…
November 18, 2024 The Ontario government is building over 1,300 new electric vehicle (EV) charging ports in small and medium-sized communities, marking a major milestone in the province’s plan to increase access to EV chargers outside of large urban centres and support the electrification of transportation across the province. As the province continues to see… Read More…
November 18, 2024 The Ontario government is launching the second round of its Skills Development Fund (SDF) Capital Stream starting November 29, with over $74 million in available funding to build, expand and retrofit training facilities for workers in the trades, including construction, manufacturing technology and health care. The government is also investing nearly $5 million from the first… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.
