CSA Group Alert: OxGear Safety Boots Don’t Meet Canadian Standards

Feb 26, 2016

Safety boots made by Jiayi Shoes & Plastic Co. Ltd are not certified and may pose a safety risk, says CSA Group. An independent investigation conducted by CSA Group determined that the boots were not certified by CSA Group and do not meet the CSA standard.

The affected boots are tan leather 8-inch (20-centimetre) OxGear Safety Work Boots, model number 66000.The boots display an unauthorized CSA mark and file number: 265396 on the tongue of the boot.

Check the Recall and Safety Alerts Database on the Healthy Canadians website for product recall alerts issued by Health Canada.

Electrician Forum Brought to you by Schneider Electric

Electrical Industry Canada and the Electrician Forum Need Your Expert Knowledge

As industry experts you know the products you use everyday better than anyone and should have input on what information you receive about products and what could improve them.

Therefore, we want your insight on the biggest challenges or issues you face when installing loadcentres, breakers (CAFI, GFI's…) and other surge protection devices. We ask that you do not provide product specific details but rather your general issues and concerns or any questions that have come to mind while working with these product types. Provide us with your valued expert insight into the issues you have faced so manufacturers can better inform you about the installation and use of these products. Lets generate some discussion that will help guide the Industry.

Make your comments HERE

Powerline Contact Continues to be Unforgiving – Powerline Safety Week Starts May 13 with Ontario-wide Education Campaign

ESA Powerline Safety The invisible impact of powerlines should never be underestimated. In the past decade alone, 19 people in Ontario have lost their lives from overhead powerline contact. May 13 to 19 is Powerline Safety Week, which is meant to inform people across the province to stay vigilant of powerlines when doing work at home or on the job.

"Our work in raising awareness of powerline safety won't be finished until there are zero injuries or lives lost from contact," says Dr. Joel Moody, Chief Public Safety Officer, Electrical Safety Authority (ESA). "All it takes is a misstep or careless error to change the life of you, your colleagues or family."

ABB creates state-of-the-art solution for CO2-neutral and energy self-sufficient factory of the future

ABB Eco Factory ABB has an extensive portfolio of eco-efficient solutions and services that can help decouple economic growth from environmental impacts. In fact, over half of ABB's worldwide revenues are generated by technologies that combat the causes of climate change. The company’s goal is to increase this contribution from 57 percent in 2018 to 60 percent by 2020.

The company’s commitment to combatting climate change includes limiting the environmental impact of its own operations. ABB’s current target for climate action is to reduce its own GHG emissions by 40 percent by 2020 from a 2013 baseline.

Wind Energy On Track to Add 1,000 MW of New Capacity in 2019

Canada’s wind energy industry further expanded its installed capacity in 2018, while solidifying its status as the lowest-cost source of new electricity generation. Newly commissioned projects brought total national wind energy capacity to close to 13,000 megawatts (MW). Meanwhile, competitive auction results in Saskatchewan and Alberta confirmed the wind industry’s ability to continue to deliver record-low prices.

The six wind energy projects that were powered up in 2018 added 566 MW of installed capacity — a continuation of steady growth that contributed to an average annual growth rate of 20% per year since 2008.

Latest Articles

Britech Signs Agreement with World Leader in ...

Britech Corp, one of Canada’s largest heating cable companies has signed a formal agreement ...