Electrical Inspectors Association of Alberta Annual Conference: Notes on CE Code Changes

Electrical Inspectors Code Changes

 Feb 18, 2016


Pierre McDonald

On February 12 and 13, the Electrical Inspectors Association of Alberta (EIAA) hosted its 20th Annual Technical Conference in Edmonton, Alberta. Almost 100 delegates attended the two-day event, which saw presentations on the Canadian Electrical Code (CE Code) Sections 10 and 24 as well several discussions on some of the new 2015 CE Code requirements in force in Alberta as of January 1, 2016. This event allows Inspectors an opportunity to liaise with one another, discuss code interpretation, and review trends that are apparent within the industry, all to facilitate safer electrical installations throughout Alberta.

Alberta inspectors and the safety codes system
The Alberta electrical inspection environment is a little different than most provinces or territories. It operates on the premise that municipalities and corporations should have the opportunity to administer the Alberta Safety Codes Act within their boundaries.

The Safety Codes Council (SCC) was set up June 1991 to administer this system. The SCC is a statutory corporation that formulates and oversees the development and administration of safety codes and standards throughout the province. In a nutshell, the SCC is the body that certifies safety codes officers (inspectors) and accredits agencies, municipalities and corporations to administer the act.

Certified safety codes officers, or SCOs, inspect the construction, installation, operation, and maintenance of structures and systems to ensure compliance with relevant codes, standards and regulations. To be able to perform Inspections for any accredited entity (agencies, municipalities and corporations), an SCO requires a designation of powers. This designation of powers is the process of authorizing SCOs to function within the framework of an accredited organization. It provides the safety codes officer the authority to administer the Safety Codes Act.

Conference agenda highlights
This conference allowed participants (predominately electrical SCOs) to discuss and compare notes on various changes to the CE Code. Agenda items were submitted looking for clarification, conversation and in some cases a decision on how these code rules would be handled in Alberta. Some agenda items were submitted for information-only purposes. Regardless, they were all informative.

Key agenda items were:
• classification of patient care and intermediate care areas, Section 24
• flame spread ratings of cable and raceways in the 2014 Alberta Building Code, CE Code rule 2-130 and 2-132
• Rule 4-004 ampacity of wires and cable and IEEE calculations
• cable seals in Zone 2 locations
• AFCI In dwelling units, rule 26-724(f)
• disconnecting means for the combiner, rule 64-060
• arc-fault circuit protection for off-grid installation, rule 64-216
• rapid shutdown rule 64-218

The above are just a few of the 24 agenda items submitted, with one in particular generating much discussion: the AFCI requirements for receptacles in dwelling units. It was pointed out that the original intent of AFCI protection was for receptacles in bedrooms because they were subjected to abuse from moving furniture (beds, desks, side tables and dresser drawers). Keeping this logic in mind, it was commented that those receptacles in use when a user was present or those receptacles not subject to abuse should be exempt from the rule. This sparked a discussion regarding receptacles in garages, attached or detached; exterior receptacles; vacuum receptacle; microwave; gas range; washing machine… the list goes on. After the discussions, it was agreed by the majority to enforce rule 26-724 as written, for all those specific receptacles (unless other code rules apply, e.g., 76-016) except for those installed in a detached garage, which is considered not part of the dwelling unit.

Section 10 re-write
Conference participants were also treated to an informative presentation on the planned re-write of Section 10, Grounding and Bonding. This work is extremely preliminary at this time and some indication on the direction the Section 10 sub-committee is going can be seen on the CSA public review website: http://publicreview.csa.ca/Home/View/675779.

Based on the public review document, the working groups will most likely re-arrange Section 10 in the following order:
• 10-100 General
• 10-200 Solidly Grounded Systems
• 10-300 Impedance Grounded Systems
• 10-400
• 10-500 Bonding
• 10-600 Protective Bonding
• 10-700 Equipotential Bonding

While the above short description covers only a small portion of the topics discussed and presented, this conference provided a venue for encouraging a uniform interpretation of the CE Code among the over 500 certified electrical SCOs in Alberta (data from the 2014 Safety Codes Council Annual report). The Electrical Inspectors Association of Alberta schedules this yearly conference in the first or second week of February with meeting notices going out to the industry in the late fall. While the audience is mostly electrical SCOs, anyone from the electrical industry is invited to attend. Keep your eye on the association website for information on the next conference, February 2017: https://www.eiaa.ca/.


Pierre McDonald, CET, is Senior Regulatory Affairs Representative/Répresentant Principal, Affaires Réglementaires, Underwriters Laboratories of Canada Inc. Based in St. Albert, AB, Pierre has been a member of the Canadian Electrical Code Part 1 technical committee as well as several subcommittees including serving as Chair of Sections 6 and 76 and as a member representing regulators on several other CSA committees. Pierre is still active with code development and interpretation

 

Other articles by Pierre McDonald:

Code and Public Safety 

Section 62: Fixed Electric Heating Systems 

Now Available: CAN/ULC Standard on Electric Utility Workplace Electrical Safety

Establishing When the CE Code Becomes Mandatory 

UL Code Link 

CAN/ULC-S576-14, Standard for Mass Notification System Equipment and Accessories 

Canadian CE Code Changes: Section 20 and More 

Meeting National Building Code of Canada Requirements 

Conductor Ampacities and Their Temperature Rating

Codes and Standards – Provincial Legislation and the Administrative Requirements of the CE Code 

Changes to Section 12 Wiring Methods 

Section 4 Conductors — Changes from the Canadian Electrical Code’s 2009, 21st Edition to the 2012, 22nd Edition 

 

 

Related Articles


Latest Articles


Changing Scene

  • BC Hydro Making it Easier and More Affordable to Connect New Homes

    BC Hydro Making it Easier and More Affordable to Connect New Homes

    July 24, 2025 BC Hydro is supporting the construction of new housing developments in growing communities by advancing changes to streamline upgrades and reducing the cost of new customer connections to BC Hydro’s electricity grid. “As communities across B.C. grow, so does the need for essential housing. We are committed to ensuring we’re ready to… Read More…

  • Mitrex Sets Record with Largest BIPV Solar Panel Mural at SunRise Residential in Edmonton

    Mitrex Sets Record with Largest BIPV Solar Panel Mural at SunRise Residential in Edmonton

    July 22, 2025 Building-Integrated Photovoltaics (BIPV) manufacturer, Mitrex proudly announces that its transformative SunRise Residential project in Edmonton, Alberta, has earned the Guinness World Record for the largest solar panel mural globally. This landmark project showcases Mitrex’s innovative BIPV solar panels, blending cutting-edge solar technology with vibrant cultural artistry to redefine sustainable architecture. Sustainable Architecture with BIPV Spanning over 30,000 square feet, the Mitrex eFacade PRO plus… Read More…

  • Nexans Unveils a Cable Made with 100% Recycled Materials

    Nexans Unveils a Cable Made with 100% Recycled Materials

    July 24, 2025 Nexans has reached a major milestone in its sustainability journey by developing a prototype cable made entirely from recycled materials — a first in the company’s history. This innovation combines technical performance, industrial feasibility, and a drastically reduced environmental footprint, marking a decisive step forward in circular economy. A cross-continental success story… Read More…

  • EFC Welcomes New Manufacturer Member: MGM Transformers

    EFC Welcomes New Manufacturer Member: MGM Transformers

    July 24, 2025 Since 1974, MGM Transformers has produced tough and trusted transformers designed to get the job done right. As a leading manufacturer, the company employs a highly experienced and dedicated engineering team that excels in custom designs. MGM Transformers is committed to excellent quality and service, offering industry-leading lead times and exceptional customer service. MGM Transformers specializes… Read More…