Where Electrical Technologists and Technicians Work
April 4 2016
Among nine categories, manufacturing employs one in 3, twice as much as the next highest category.
Source: Service Canada: www.servicecanada.gc.ca.
Related Articles
Grounded in Ontario: Part 2 of the Top Ten Most Common Defects with Trevor Tremblay
November 11, 2022 Trevor Tremblay, technical advisor at ESA, returns to finish the list of the most common defects recorded – and explains how LECs can be prepared to avoid them in their work As a Licensed Electrical Contractor (LEC), your defect ratio is one of the factors in determining the risk ranking for risk…
ECAO’s Ontario’s Energy Future Sector Analysis Report
June 14, 2024 Driven by economy-wide decarbonization efforts in response to the global climate crisis, Ontario’s electricity sector is rapidly evolving to enable the shift from fossil-based energy sources to clean energy sources. At the same time, with electrification of industry, transportation and more, it is abundantly clear that the demand for electricity supply is…
Why Do Some Workers Take Risks?
Many of us take risks in their daily lives, such as using our cell phone while driving or exceeding the speed limits, while fortunately avoiding any potential injury and damage.
New STANDATA: Rowhousing Buildings with Five or More Dwelling Units
February 2, 2025 Purpose To clarify the application for professional involvement for building services and systems for buildings classified asresidential occupancy identified as a multiple-family dwelling containing five or more dwelling units in a rowhouseconfiguration. Discussion Division C, Subclause 2.4.1.1.(1)(b)(ii) of the National Building Code – 2023 Alberta Edition does not requireprofessional involvement where a…
Guide to the Canadian Electrical Code, Part 1, 25th Edition– A Road Map: Appendix J – Annex J18 – Part B
August 14, 2023 By William (Bill) Burr (The 25th Edition of the CE-C, Part I, (C22.1-21) * is available from CSA Group. This discussion of Appendix J – Annex J18 B is based on the 25th edition). The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you…
Schneider Electric Research Shows Digital and Electric Solutions can Cut Carbon Emissions in Office Buildings
September 29, 2023 Retrofitting buildings using a digital-first approach is the best pathway to decarbonization, according to new research from Schneider Electric, the leader in the digital transformation of energy management and automation. Buildings represent an estimated 37 per cent of global carbon emissions[i], and as about half of today’s buildings are still likely to be in…
Grounded in Ontario: Part 2 of the Top Ten Most Common Defects with Trevor Tremblay
November 11, 2022 Trevor Tremblay, technical advisor at ESA, returns to finish the list of the most common defects recorded – and explains how LECs can be prepared to avoid them in their work As a Licensed Electrical Contractor (LEC), your defect ratio is one of the factors in determining the risk ranking for risk…
ECAO’s Ontario’s Energy Future Sector Analysis Report
June 14, 2024 Driven by economy-wide decarbonization efforts in response to the global climate crisis, Ontario’s electricity sector is rapidly evolving to enable the shift from fossil-based energy sources to clean energy sources. At the same time, with electrification of industry, transportation and more, it is abundantly clear that the demand for electricity supply is…
Why Do Some Workers Take Risks?
Many of us take risks in their daily lives, such as using our cell phone while driving or exceeding the speed limits, while fortunately avoiding any potential injury and damage.
New STANDATA: Rowhousing Buildings with Five or More Dwelling Units
February 2, 2025 Purpose To clarify the application for professional involvement for building services and systems for buildings classified asresidential occupancy identified as a multiple-family dwelling containing five or more dwelling units in a rowhouseconfiguration. Discussion Division C, Subclause 2.4.1.1.(1)(b)(ii) of the National Building Code – 2023 Alberta Edition does not requireprofessional involvement where a…
Guide to the Canadian Electrical Code, Part 1, 25th Edition– A Road Map: Appendix J – Annex J18 – Part B
August 14, 2023 By William (Bill) Burr (The 25th Edition of the CE-C, Part I, (C22.1-21) * is available from CSA Group. This discussion of Appendix J – Annex J18 B is based on the 25th edition). The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you…
Schneider Electric Research Shows Digital and Electric Solutions can Cut Carbon Emissions in Office Buildings
September 29, 2023 Retrofitting buildings using a digital-first approach is the best pathway to decarbonization, according to new research from Schneider Electric, the leader in the digital transformation of energy management and automation. Buildings represent an estimated 37 per cent of global carbon emissions[i], and as about half of today’s buildings are still likely to be in…
Grounded in Ontario: Part 2 of the Top Ten Most Common Defects with Trevor Tremblay
November 11, 2022 Trevor Tremblay, technical advisor at ESA, returns to finish the list of the most common defects recorded – and explains how LECs can be prepared to avoid them in their work As a Licensed Electrical Contractor (LEC), your defect ratio is one of the factors in determining the risk ranking for risk…
ECAO’s Ontario’s Energy Future Sector Analysis Report
June 14, 2024 Driven by economy-wide decarbonization efforts in response to the global climate crisis, Ontario’s electricity sector is rapidly evolving to enable the shift from fossil-based energy sources to clean energy sources. At the same time, with electrification of industry, transportation and more, it is abundantly clear that the demand for electricity supply is…
Why Do Some Workers Take Risks?
Many of us take risks in their daily lives, such as using our cell phone while driving or exceeding the speed limits, while fortunately avoiding any potential injury and damage.
New STANDATA: Rowhousing Buildings with Five or More Dwelling Units
February 2, 2025 Purpose To clarify the application for professional involvement for building services and systems for buildings classified asresidential occupancy identified as a multiple-family dwelling containing five or more dwelling units in a rowhouseconfiguration. Discussion Division C, Subclause 2.4.1.1.(1)(b)(ii) of the National Building Code – 2023 Alberta Edition does not requireprofessional involvement where a…
Guide to the Canadian Electrical Code, Part 1, 25th Edition– A Road Map: Appendix J – Annex J18 – Part B
August 14, 2023 By William (Bill) Burr (The 25th Edition of the CE-C, Part I, (C22.1-21) * is available from CSA Group. This discussion of Appendix J – Annex J18 B is based on the 25th edition). The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you…
Schneider Electric Research Shows Digital and Electric Solutions can Cut Carbon Emissions in Office Buildings
September 29, 2023 Retrofitting buildings using a digital-first approach is the best pathway to decarbonization, according to new research from Schneider Electric, the leader in the digital transformation of energy management and automation. Buildings represent an estimated 37 per cent of global carbon emissions[i], and as about half of today’s buildings are still likely to be in…
Latest Articles
-
EFC Supporting Industry Amongst Tariff Uncertainty
As a major representative of the electrical and automation industry, Electro Federation Canada remains committed to supporting its members and the industry overall in navigating the complexities of international trade policies. Read More…
-
CanREA Launches New and Improved Go Solar Guide 2025
March 21, 2025 The Canadian Renewable Energy Association (CanREA) launched the 2025 edition of its annual Go Solar Guide today, encouraging Canadians to go solar. The 2025 version is new and improved: Now a web portal, it is free and accessible to everyone, anytime. “CanREA is proud to produce an annual consumer guide containing everything… Read More…
-
STANDATA Interpretation: 2024 Canadian Electrical Code, Part 1 Section 6 – Number of Supply Services Permitted
March 21, 2025 Purpose To clarify requirements for installations regarding the number of supply services permitted to be located on one unit of a building consisting of row housing for residential occupancies. Discussion There has been inconsistent application of the 2024 Canadian Electrical Code (CE Code) Part 1, Rule 6-102 regarding type and location where… Read More…
-
PEI Pauses Solar Electric Rebate Program
March 21, 2025 Rebate pre-approval letters for the Solar Energy Rebate program are currently on hold as the PEI government conducts a program review to ensure it continues to provide the best possible benefits to the most Islanders. We appreciate your patience. We do expect the program to be operational in the coming weeks. Check… Read More…
Changing Scene
-
Mersen Fuse Selection Guide
March 21, 2025 Unlock Instant Access to the Mersen Fuse Selection Guide Learn how to match voltage ratings, nail amperage calculations, master interrupting ratings, and conquer temperature derating, all without breaking a sweat. Go HERE to download Read More…
-
EFC’s Business Sections Welcomes New Field Service Vice Chair
March 21, 2025 EFC is pleased to announce Matthew De Ciantis, M&D De Ciantis Enterprises Inc., as the new Vice Chair of the Field Service Business Section. Matthew is a long-standing professional in the electrical industry who fulfilled many roles within his generational family electrical contracting company. Matthew’s experience and breadth of operational knowledge has… Read More…
-
EFC Welcomes New Manufacturer Member: NOARK Electric
March 21, 2025 NOARK Electric is a global manufacturer of low, medium and high low voltage electrical components for industrial applications. They specialize in providing electrical circuit protection and motor control solutions for OEMs, contractors, and distributors. Dedicated to quality and value, their mission is to deliver top-tier products at exceptional price, backed by world-class… Read More…
-
Mac’s II Agencies Strengthens Lighting Division
March 19, 2025 Mac’s II Agencies Announces Jamie Capell as the New Sales Manager for Lighting Specification Mac’s II Agencies is pleased to announce the expansion of its lighting division with the addition of Jamie Capell as the Sales Manager for Lighting Specification. Jamie brings 25 years of experience in the lighting and electrical industry, most notably… Read More…
