What Electrical Contractors Earn
Related Articles
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 1
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
March New Housing Investment Up 9% YOY
Investment in residential construction totalled $28.2 billion in the first quarter, up 7.6% from the same quarter of 2016.
Secondary Network Arc Flash Case Study
Network crews were working in an electrical room tasked to install an 800 A disconnect for a temporary service on the network secondary. The 3-spot network was energized at 480 V on the secondary (34.5 kV on the primary) and all three network protectors were closed and serving load.
Five Reasons for Preventive Maintenance
Keeping electrical distribution equipment at optimum performance levels can be challenging and stressful. Why? Because nothing operates without reliable power. Developing a maintenance strategy for your electrical distribution system is a sound business decision and implementing an electrical preventive maintenance program is a great starting point. Here are five reasons why.
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 1
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
March New Housing Investment Up 9% YOY
Investment in residential construction totalled $28.2 billion in the first quarter, up 7.6% from the same quarter of 2016.
Secondary Network Arc Flash Case Study
Network crews were working in an electrical room tasked to install an 800 A disconnect for a temporary service on the network secondary. The 3-spot network was energized at 480 V on the secondary (34.5 kV on the primary) and all three network protectors were closed and serving load.
Five Reasons for Preventive Maintenance
Keeping electrical distribution equipment at optimum performance levels can be challenging and stressful. Why? Because nothing operates without reliable power. Developing a maintenance strategy for your electrical distribution system is a sound business decision and implementing an electrical preventive maintenance program is a great starting point. Here are five reasons why.
Choosing the Proper Components for Your Cable Assembly or Wire Harness, Part 1
A key component of any electronic or electrical system is the cable assembly/cable harness, yet it typically is one of the last components to be addressed. When designing a system the cable assembly should be addressed as early in the design stage as possible to allow for the best design to be specified for the application at hand. Many components will be involved in the assembly design, and each component will have an impact on the performance of the finished cable assembly or wire harness. If an assembly that is either over-designed or under-designed is used, there will be negative consequences of the performance of the finished system.
March New Housing Investment Up 9% YOY
Investment in residential construction totalled $28.2 billion in the first quarter, up 7.6% from the same quarter of 2016.
Secondary Network Arc Flash Case Study
Network crews were working in an electrical room tasked to install an 800 A disconnect for a temporary service on the network secondary. The 3-spot network was energized at 480 V on the secondary (34.5 kV on the primary) and all three network protectors were closed and serving load.
Five Reasons for Preventive Maintenance
Keeping electrical distribution equipment at optimum performance levels can be challenging and stressful. Why? Because nothing operates without reliable power. Developing a maintenance strategy for your electrical distribution system is a sound business decision and implementing an electrical preventive maintenance program is a great starting point. Here are five reasons why.
Latest Articles
-
New Gender Equality Report Card Shows Most Jurisdictions are Failing
November 10, 2025 The Canadian Coalition of Women in Engineering, Science, Trade and Technology (CCWESTT) has just released the first Gender Equality Report Card, which provides comprehensive, evidence-based insight into the state of gender equality across Canada’s provinces and territories in science, engineering, trades and technology (SETT) workplaces. The report draws on 18 participatory research… Read More…
-
![Guide to the Canadian Electrical Code, Part 1[i] 26th Edition – A Road Map: Section 46](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
Guide to the Canadian Electrical Code, Part 1[i] 26th Edition – A Road Map: Section 46
November 10, 2025 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendices B and… Read More…
-
Calgary Project Transforms Office Building into Energy Efficient Housing
November 10, 2025 More than 200 Calgarians now have new homes in Downtown West as the former Dominion Centre office reopens as Dominion Civic Apartments. The former Dominion Centre has been transformed from 100,000 square feet of vacant office space to an energy efficient and climate resilient residential building with 132 modern rental suites. The… Read More…
-
Remembering Katy Shebath, A Kind And Thoughtful Leader
November 10, 2025 By Stanpro Katy Shebath played a critical role alongside her brother, David Nathaniel, throughout the last 32 years of Standard Products journey. She remains, with David, the heart and soul of this company. A Driving Force Behind STANDARD When Katy joined STANDARD in 1986, she took on the administration of the company. At… Read More…
Changing Scene
-
A Groundbreaking Return to the Sir Robert Peel Centre for Ellis Don
November 10, 2025 In a full circle moment, EllisDon has broken ground on the Sir Robert Peel Centre Redevelopment Project, a facility originally constructed by EllisDon in the 1980s. Now, this milestone marks the beginning of a new chapter in Peel Region’s public safety infrastructure. The redevelopment will deliver a modern, high-performance policing hub designed… Read More…
-
BCCA Response to Federal Budget 2025
November 10, 2025 The BCCA welcomes the federal government’s investments into construction and infrastructure in Budget 2025. The budget includes increasing Canada Infrastructure Bank funding by $10 billion and funding the new Major Projects Office to the tune of $213.8 million over 5 years. The BCCA also supports the government’s investment into the construction workforce,… Read More…
-
Government of Canada Releases Budget 2025
November 10. 2025 Canada faces a rapidly changing and increasingly uncertain world. The rules-based international order and the trading system that powered Canada’s prosperity for decades are being reshaped – hurting companies, displacing workers, causing major disruption and upheaval for Canadians. In the face of global uncertainty, Canada’s new government is focused on what we… Read More…
-
CME: Budget 2025 Delivers Key Gains for Manufacturers Facing Tariff Pressures, but Canada Still Needs Deeper Competitiveness Reforms
November 10, 2025 Canadian Manufacturers & Exporters (CME) applauds Budget 2025 for recognizing the serious challenges facing Canada’s economy amid ongoing U.S. trade actions and for introducing new incentives to spur investment. “This budget takes meaningful steps to support manufacturers under pressure and acknowledges the critical role our sector plays in Canada’s economic future,” said… Read More…
