What Electrical Contractors with 12 Different Employers Earn
12 employers, 12 different median salaries. A number of factors not measured here could account for a range in salaries.
Related Articles
Using Drones to Inspect Wind Turbines
At a time when wind power is expanding rapidly, blade inspections are becoming a crucial maintenance activity. Although a number of inspection methods exist, new drone-based technologies are increasingly appealing.
What Are the Testing Requirements for LED Lumen Maintenance?
Partners may claim an LED lumen maintenance percentage at 25,000 hours, 15,000 hours, or 10,000 hours as an optional metric.
Arc Flash and Shock Hazards, CSA Z462 and IEEE 1584 — Getting It Right!
I was reminded again over the past few weeks in working with clients on electrical safety program development, following up on LinkedIn posts, and reviewing IEEE 1584 based arc flash hazard incident energy analysis study P.Eng. reports for clients that industry doesn’t understand the CSA Z462 Workplace electrical safety standard…
Inspection Results: Electrical Hazards Aren’t the Only Risks Electricians Face
In November and December 2016, Ontario Ministry of Labour inspectors conducted an enforcement blitz involving electrical and related hazards at construction sites.
Popular Skills for Electrical Apprentice and Correlation to Pay
This graph shows hourly pay and correlation to pay for electrical apprentices. Troubleshooting and PLC/Automation are the most sought after skills, among the six surveyed.
Discussing the Importance of Licensing and Safety with ESA’s Soussanna Karas
Soussanna Karas is ESA’s Director of Licensing. Part of her role, which she took on in January 2020, is to manage the ESA licensing department.
Using Drones to Inspect Wind Turbines
At a time when wind power is expanding rapidly, blade inspections are becoming a crucial maintenance activity. Although a number of inspection methods exist, new drone-based technologies are increasingly appealing.
What Are the Testing Requirements for LED Lumen Maintenance?
Partners may claim an LED lumen maintenance percentage at 25,000 hours, 15,000 hours, or 10,000 hours as an optional metric.
Arc Flash and Shock Hazards, CSA Z462 and IEEE 1584 — Getting It Right!
I was reminded again over the past few weeks in working with clients on electrical safety program development, following up on LinkedIn posts, and reviewing IEEE 1584 based arc flash hazard incident energy analysis study P.Eng. reports for clients that industry doesn’t understand the CSA Z462 Workplace electrical safety standard…
Inspection Results: Electrical Hazards Aren’t the Only Risks Electricians Face
In November and December 2016, Ontario Ministry of Labour inspectors conducted an enforcement blitz involving electrical and related hazards at construction sites.
Popular Skills for Electrical Apprentice and Correlation to Pay
This graph shows hourly pay and correlation to pay for electrical apprentices. Troubleshooting and PLC/Automation are the most sought after skills, among the six surveyed.
Discussing the Importance of Licensing and Safety with ESA’s Soussanna Karas
Soussanna Karas is ESA’s Director of Licensing. Part of her role, which she took on in January 2020, is to manage the ESA licensing department.
Using Drones to Inspect Wind Turbines
At a time when wind power is expanding rapidly, blade inspections are becoming a crucial maintenance activity. Although a number of inspection methods exist, new drone-based technologies are increasingly appealing.
What Are the Testing Requirements for LED Lumen Maintenance?
Partners may claim an LED lumen maintenance percentage at 25,000 hours, 15,000 hours, or 10,000 hours as an optional metric.
Arc Flash and Shock Hazards, CSA Z462 and IEEE 1584 — Getting It Right!
I was reminded again over the past few weeks in working with clients on electrical safety program development, following up on LinkedIn posts, and reviewing IEEE 1584 based arc flash hazard incident energy analysis study P.Eng. reports for clients that industry doesn’t understand the CSA Z462 Workplace electrical safety standard…
Inspection Results: Electrical Hazards Aren’t the Only Risks Electricians Face
In November and December 2016, Ontario Ministry of Labour inspectors conducted an enforcement blitz involving electrical and related hazards at construction sites.
Popular Skills for Electrical Apprentice and Correlation to Pay
This graph shows hourly pay and correlation to pay for electrical apprentices. Troubleshooting and PLC/Automation are the most sought after skills, among the six surveyed.
Discussing the Importance of Licensing and Safety with ESA’s Soussanna Karas
Soussanna Karas is ESA’s Director of Licensing. Part of her role, which she took on in January 2020, is to manage the ESA licensing department.
Latest Articles
-
EFC Supporting Industry Amongst Tariff Uncertainty
As a major representative of the electrical and automation industry, Electro Federation Canada remains committed to supporting its members and the industry overall in navigating the complexities of international trade policies. Read More…
-
CanREA Launches New and Improved Go Solar Guide 2025
March 21, 2025 The Canadian Renewable Energy Association (CanREA) launched the 2025 edition of its annual Go Solar Guide today, encouraging Canadians to go solar. The 2025 version is new and improved: Now a web portal, it is free and accessible to everyone, anytime. “CanREA is proud to produce an annual consumer guide containing everything… Read More…
-
STANDATA Interpretation: 2024 Canadian Electrical Code, Part 1 Section 6 – Number of Supply Services Permitted
March 21, 2025 Purpose To clarify requirements for installations regarding the number of supply services permitted to be located on one unit of a building consisting of row housing for residential occupancies. Discussion There has been inconsistent application of the 2024 Canadian Electrical Code (CE Code) Part 1, Rule 6-102 regarding type and location where… Read More…
-
PEI Pauses Solar Electric Rebate Program
March 21, 2025 Rebate pre-approval letters for the Solar Energy Rebate program are currently on hold as the PEI government conducts a program review to ensure it continues to provide the best possible benefits to the most Islanders. We appreciate your patience. We do expect the program to be operational in the coming weeks. Check… Read More…
Changing Scene
-
Mersen Fuse Selection Guide
March 21, 2025 Unlock Instant Access to the Mersen Fuse Selection Guide Learn how to match voltage ratings, nail amperage calculations, master interrupting ratings, and conquer temperature derating, all without breaking a sweat. Go HERE to download Read More…
-
EFC’s Business Sections Welcomes New Field Service Vice Chair
March 21, 2025 EFC is pleased to announce Matthew De Ciantis, M&D De Ciantis Enterprises Inc., as the new Vice Chair of the Field Service Business Section. Matthew is a long-standing professional in the electrical industry who fulfilled many roles within his generational family electrical contracting company. Matthew’s experience and breadth of operational knowledge has… Read More…
-
EFC Welcomes New Manufacturer Member: NOARK Electric
March 21, 2025 NOARK Electric is a global manufacturer of low, medium and high low voltage electrical components for industrial applications. They specialize in providing electrical circuit protection and motor control solutions for OEMs, contractors, and distributors. Dedicated to quality and value, their mission is to deliver top-tier products at exceptional price, backed by world-class… Read More…
-
Mac’s II Agencies Strengthens Lighting Division
March 19, 2025 Mac’s II Agencies Announces Jamie Capell as the New Sales Manager for Lighting Specification Mac’s II Agencies is pleased to announce the expansion of its lighting division with the addition of Jamie Capell as the Sales Manager for Lighting Specification. Jamie brings 25 years of experience in the lighting and electrical industry, most notably… Read More…
