Six Everyday Excuses that Bruise Your Brand

Jeff Mowatt

 

June 4, 2018

By Jeff Mowatt

Working with organizations for over 25 years to transform customer service culture, I’ve discovered that some employees — who would describe themselves as solid performers — actually have a habit of delivering more excuses than results. Unfortunately, your customers don’t buy excuses — literally. The more your team members rationalize poor service, the more they’ll cost your organization in trust equity. See if your employees use any of these six common customer service excuses. We’ll start with the worst offenders:

1. “It’s against policy”

Customer service policies must make obvious sense to customers. If not, overly restrictive and outdated rules practically invite customers to argue with employees or rant about your brand in social media. Set your policies around what’s best for your brand and best for customer loyalty. Don’t let lawyers establish your customer service policies. If you must have an unpopular policy, ensure that your employees understand it, can get behind it, and can easily explain it to customers. More importantly, train and empower frontline employees to overrule policies when common sense dictates.

2. “Our shipping people messed up”

Customers have zero patience for service providers who blame foul-ups on someone else, be it on co-workers in another department, or external suppliers/contractors who are part of your supply chain. Blaming others makes customers assume that they’ll get the proverbial run-around and intensifies their aggravation, making a bad situation worse. So take the opposite approach — accept responsibility. Say, “Looks like we messed-up. I’m sorry about that.” Most customers realize it wasn’t actually you who made the error, and they’ll respect the fact that you are nonetheless stepping up to own it.

3. “We’re swamped this time of year”

This excuse is similar to the recorded on-hold phone message you hear from call centres: “Due to high call volumes…” Essentially this excuse tells customers that the organization has experienced this problem repeatedly, but (since they don’t really care that much about customer experience) hasn’t bothered to do anything to fix it. That’s better left unsaid. Best to simply thank the customer for their patience, and get on with what you can do for them.

4. “I’m not authorized to do that”

In my customer service seminars we talk about employee status, and how it’s a mistake to put a customer at a higher or lower status than the service provider. Instead, you want employees to be viewed by customers as their trusted advisors. So when you need to ask higher-ups for input, explain to the customer that you want to look into this further to see what you can come up with. Then discreetly discuss the matter with your supervisor. When afterwards you report back to the customer, tell them, “Here’s what I came up with.” That makes customers feel like they’re dealing with an equal, not wasting their time.

5. “I assumed you wanted…”

Customers want service providers to help them make decisions. And in the case where customers view you as their trusted advisor, they even want you to make decisions on their behalf. But that only works when the service provider has discussed the customer’s needs and overall objectives. We earn the right to make assumptions after talking with the customer and gaining their respect. Paraphrase your understanding of their needs with words like “sounds like”. For example, “Sounds like you’d like to…” After you’ve done that, customers will be much more comfortable and confident with your assumptions.

6. “Sorry, I’m new here”

Actually, in this case customers will accept this excuse, which is why I put it last. Customers can be wonderfully compassionate when a newbie, who realizes something is taking longer than it should, apologizes for the delay and explains the situation. Tip: rather than saying bear with me (which sounds like an order), instead say I appreciate your patience. For example, “Sorry for the delay, this is my first week here. I appreciate your patience with me.” Now the customer feels like a hero for being nice.

Bottom line: in every organization things will occasionally go wrong that put customer relationships at risk. The key to preserving the customer connection is ensuring frontline employees are trained to recover trust. As for managers, revisit your policies to ensure they don’t force employees to automatically say no to customers when instead they should be looking for ways to say yes. After all, if you don’t satisfy that customer, your competitor will. Then you’ll have in bigger problems where excuses won’t matter.

This article is based on the bestselling book, Influence with Ease by Hall of Fame motivational speaker, Jeff Mowatt. To obtain your own copy of his book or to inquire about engaging Jeff for your team, visit www.jeffmowatt.com.

* The 2018 Customer Service Leadership Summit takes place November 15, in Edmonton. Find out more: www.customerserviceleadershipsummit.com

 

Related Articles


Latest Articles

  • Stephanie Medeiros on EV Infrastructure in Canada, Innovative Technologies, Well-Planned Charging Networks, & Commercial Fleets

    Stephanie Medeiros on EV Infrastructure in Canada, Innovative Technologies, Well-Planned Charging Networks, & Commercial Fleets

    September 3, 2026 By Blake Marchand In this Q&A with Stephanie Medeiros, the Head of Mobility at Schneider Electric Canada provides insight into her perspective on EV charging infrastructure in Canada, factors that will contribute to growing EV adoption, grid modernization for commercial fleets, the role of Vehicle-to-Grid and other innovative approaches to electrification. The focus of… Read More…

  • LEDVANCE: Understanding Light Beam Angles

    LEDVANCE: Understanding Light Beam Angles

    September 3, 2026 Light Beam Angles: How It Affects Different Types of Lighting, Where It Is Applied & What to Consider When Choosing the Right One Beam angle is important in lighting design. It determines how light spreads within a space and influences both functionality and atmosphere. By understanding beam angles, you can achieve both… Read More…

  • ITC 101 Series: Why Certifications (UL, CSA) Matter in Industrial Components

    ITC 101 Series: Why Certifications (UL, CSA) Matter in Industrial Components

    September 2, 2026 By ITC Electrical Components When selecting industrial electrical components, certification is more than a logo on a datasheet. A certification mark indicates that a product or component has been independently evaluated against specified requirements for its intended market. In North America, selecting products with the appropriate certification can affect regulatory acceptance, equipment… Read More…

  • Project Spotlight: Leigh Square Fountain

    Project Spotlight: Leigh Square Fountain

    September 2, 2026 In spring 2025, the City of Port Coquitlam unveiled a transformed Leigh Square, reimagined as a vibrant, accessible, and welcoming gathering place in the heart of downtown. At the heart of the renewed plaza, a Bellagio-style programmable dancing fountain is integrated directly into the paving—three interlocking rings where jets rise, fall, and… Read More…


Changing Scene

  • 2026 Ontario Apprenticeship Awards Call for Nominations

    2026 Ontario Apprenticeship Awards Call for Nominations

    September 3, 2026 Skilled Trades Ontario is proud to open nominations for the 2026 Ontario Apprenticeship Awards, recognizing outstanding apprentices, journeypersons, organizations and skilled trades leaders who are helping strengthen Ontario’s apprenticeship system. Award recipients will be announced at the Ontario Apprenticeship Summit on November 4, 2026, at the Toronto Congress Centre. Nominations must be submitted… Read More…

  • Bartle & Gibson Announces New Partnership with Hubbell Canada

    Bartle & Gibson Announces New Partnership with Hubbell Canada

    September 3, 2026 Bartle & Gibson Co. Ltd., an Alberta-based premier plumbing, heating and electrical distributor and Hubbell Canada have announced a new regional partnership enabling increased access to Hubbell Canada’s end-to-end electrical product portfolio across Western Canada. “With our strong presence in the west through 31 branches and counting located in Alberta, Saskatchewan, British… Read More…

  • Bartle & Gibson Opens Salmon Arm Location

    Bartle & Gibson Opens Salmon Arm Location

    September 3, 2026 Bartle & Gibson opened their new Salmon Arm location on July 20th. The Salmon Arm location features: This site is strategically positioned in the city of Salmon Arm, located near to the busy Picadilly Mall.  Salmon Arm branch is located at: 621- 10 Street SW Salmon ARM, BC V1E 1T1 Photo Source Read More…

  • MacKinnon Magnetics Announces Partnership with Resilient Sales Corporation in Northeastern Ontario

    MacKinnon Magnetics Announces Partnership with Resilient Sales Corporation in Northeastern Ontario

    September 3, 2026 MacKinnon Magnetics is pleased to welcome Resilient Sales Corporation as their newest sales agency partner. Resilient Sales will represent MacKinnon Magnetics across Northeastern Ontario, including the Districts of Muskoka and Parry Sound. Key markets include Sudbury, North Bay, Timmins, Kirkland Lake, Sault Ste. Marie, Huntsville, Bracebridge and Parry Sound. “This partnership expands… Read More…