Wieland Electric Compact Universal Safety Relay
October 12, 2016
Wieland Electric Inc.’s SNO4083 Series intelligent relays accept a wide range of sensor inputs for machine safety. The compact DIN rail mounted universal safety relay monitors a wide range of machine safety functions, including emergency stops, elevator access control, and heating/burner installations. These universal safety relays provide reliable monitoring for emergency stop and non-contact protection systems for machine operators in harsh industrial environments.
The SNO4083 Series universal safety relays accept inputs from single and dual channel emergency stop sensors with dry contacts (NO+NO or NO+NC), as well as PNP outputs from active sensors, reed switches from coded magnet actuators, and resistive inputs from safety mats and bumper switches. The relay’s output features 3 NO and 1 NC auxiliary contacts.
The relays are available in 24Vdc or 115/230Vac versions with either screw-clamp or spring-clamp pluggable terminations. Synchronous time monitoring function (1.5s and 0.5s) ensures that faulty sensors or improper adjustment is detected.
‘The SNO4083 Series relays feature Wieland’s MONOFLOP input de-bouncing function, which effectively eliminates the effects of contact bounce in the machine’s safety circuit. This ensures reliable reset behaviour of the relay every time,” says Martin Lalonde, application engineer at Wieland Electric. “In addition, the relay provides test pulse signals on the sensor side to provide higher diagnostic coverage and faster fault detection of crossed circuits. The SNO4083 also features a three-LED status display on the front face with practice-oriented blink codes to display typical fault conditions and facilitate troubleshooting and diagnostics.”
The Wieland SNO4083 Series universal safety relays are also approved to EN 81-1 standards for elevator applications and to EN 50156-1 standards (electrical equipment for furnaces and ancillary equipment) for burner control application. GL approvals also make the SNO4083 ideal for marine applications.
The 22.5mm wide DIN rail mounted modules are available with either screw clamp or cage clamp terminals.
Find out more: www.wieland-safety.com/SNO4083
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 10 – Grounding and Bonding](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
