Bussmann Series Quik-Spec Power Module Switch Elevator Disconnect

EIN Bussman Elevator

October 5, 2021

The Bussmann™ series Quik-Spec™ Power Module Switch is an all-in-one elevator disconnect switch available in configurations to meet virtually any single elevator shutdown and disconnect requirement.

Approvals

UL® 98 enclosed and dead-front switch – Guide WIAX, WIAX7 (Canada), File E182262

cULus, NEMA® 1, UL 50, Listed enclosure cUL per Canadian Standards C22.2, No. 0-M91-CAN/ CSA® C22.2, No. 4-M89 enclosed switch

U.B.C. and C.B.C. seismic qualified, and I.B.C. approved

Features

  • 30-400 amp 600 Vac 3-phase fused power switch
  • 200 kA RMS Short-Circuit Current Rating (SCCR)
  • Shunt trip 120 V
  • Fire safety interface relay
  • Fire alarm voltage monitoring relay (to monitor shunt trip voltage)
  • Ground lug
  • Class J fuse mounting only
  • Mechanically interlocked auxiliary contacts for hydraulic elevators with battery backup (5 amp 120 Vac rated)

Go HERE for more information

Related Articles

Hubbel

Hubbell Introduces the NXIntelligent Room Controller

Hubbell Building Automation has launched an intelligent lighting control that simplifies installation with auto-configuration. The NX Room Controller provides energy-code compliance right out of the box. The NXRoom Controller integrates automatic and manual control of lighting. Auto-configuration provides an easy and affordable way to meet energy codes, including California’s Title 24 and ASHRAE 90.1. No network or software is required to set up the unit. Users benefit from intuitive energy-saving control over the lighting in their space.

 

 

Latest Articles

Changing Scene