Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road: Section 20
October 7, 2024
Section 20 – Flammable liquid and gasoline dispensing, service stations, garages, bulk storage plants, finishing processes, and aircraft hangars.
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B, or the explanations of individual requirements contained in the CEC Handbook but will hopefully provide some help in navigating the Code.
Scope
Section 20 amends or supplements the general requirements of the code and Section 18. It provides specific rules for several special Class I, Hazardous Locations. Section 20 uses the Zone classification system, but as with Section 18, additions or modifications to existing systems may use the Division system as in Annex J20 of Appendix J. The special terminology definitions used in Section 18 also apply to Section 20.
Section 20 is divided into seven parts covering:
- Gasoline dispensing and service stations.
- Propane vehicle fuel dispensers, container filling, and storage.
- Compressed natural gas refueling stations, compressors, and storage facilities.
- Commercial repair garages.
- Bulk storage plants.
- Finishing processes; and
- Aircraft hangars.
Although requirements are similar for each facility, there are some differences so be sure to check the specific part you are considering.
There are some common rules that are the same for each location:
Hazardous areas
Each part contains a rule outlining the hazardous areas or locations for which that part applies. Wiring and equipment within the hazardous areas as defined in that part must conform to Section 18 requirements. Some parts have additional requirements, so check the appropriate rule in that part. Notes in Appendices B, G, J, Tables 63, 64 and 69, Diagrams 4,5,6,7,8,9 and 10, and the CEC Handbook are helpful in determining the hazardous areas in various parts.
Sealing
Rules 20-006, 20-012, 20-038, 20-066, 20-108, 20-208, and 20-412specify that seals are required in accordance with Section 18, and this includes horizontal as well as vertical boundaries of the hazardous locations. Additional sealing requirements may be contained in specific parts.
Bonding
Rules 20-014, 20-042, 20-070, 20-212, 20-310, 20-314, 20-406, 20-418, 20-420 and 20-422 require that all metal raceways and all non-current-carrying metal portions of fixed or portable equipment, regardless of voltage, are to be bonded to ground in accordance with Section 10.
Specific parts:
Gasoline dispensing and service stations.
Rules 20-002 to 20-014 apply to electrical apparatus and wiring installed in gasoline dispensing and service stations and other locations where gasoline or other similar volatile flammable liquids are dispensed or transferred to the fuel tanks of self-propelled vehicles. Other areas used as lubritoriums, service rooms and repair rooms, and offices, salesrooms, compressor rooms, and similar locations must, with respect to electrical wiring and equipment, conform to Rules 20-100 to 20-112, which are in the Commercial repair garages part.
Propane dispensing, container filling, and storage
Rules 20-032 to 20-042 apply to locations in which propane is dispensed or transferred to the fuel tanks of self-propelled vehicles or to portable containers, and to locations in which propane is stored or transferred from rail cars or tanker vehicles to storage containers. There are some special terms for this subsection defined in Rule 20-032:
Container refill centre (propane service station) – a facility in which a dispensing system is installed.
Dispensing system – a system, consisting of tank, pump and motor, propane dispenser, and associated piping and supports, for the storage, metering, and dispensing of liquid propane into containers.
Filling plant (bulk plant) – a bulk propane storage, distribution, and transfer facility.
Vehicle fuel dispenser – a propane dispenser, specifically for dispensing liquid propane by volume into containers.
Compressed gas and natural gas refueling stations, compressors, and storage facilities.
Rules 20-062 to 20-070 apply to locations in which compressed natural gas is dispensed to the fuel tanks of self-propelled vehicles and to associated compressors and storage facilities. These rules, however, do not apply to vehicle refueling appliances installed in accordance with CSA B149.1 that do not have storage facilities.
Commercial repair garages
Rules 20-102 to 20-112 apply to commercial garages where vehicles powered by gasoline, propane, or other flammable fuels are serviced or repaired.
Bulk storage plants
Rules 20-202 to 20-212 apply to locations where gasoline or other similar volatile flammable liquids are stored in tanks having an aggregate capacity of one carload or more, and from which such products are distributed (usually by tank truck).
Finishing processes
Rules 20-302 to 20-314 apply where paints, lacquers, or other flammable finishes are regularly or frequently applied by spraying, dipping, brushing, or by other means, and where volatile flammable solvents or thinners are used or where readily ignitable deposits or residues from such paints, lacquers, or finishes may occur.
Aircraft hangars
Rules 20-402 to 20-422 apply to locations used for storage or servicing of aircraft in which gasoline, jet fuels or other volatile flammable liquids, or flammable gases are used, but shall not include those locations used exclusively for aircraft that have never contained such liquids or gases, or that have been drained and properly purged.
Previous Installment: Section 18 Hazardous locations
In the next installment we will be discussing Section 22 – Locations in which corrosive liquids, vapours, or excessive moisture are likely to be present.
[i] Source: CSA C22.1:24, Canadian Electrical Code, Part 1 – Safety Standard for Electrical Installations. © 2021 Canadian Standards Association. Please visit Store – CSA Group or call 1-800-463-6727. With the permission of CSA Group, the material is reproduced from CSA Group standard CSA C22.1:21, Canadian Electrical Code, Part 1 – Safety Standard for Electrical Installations. This material is not the complete and official position of CSA Group on the referenced subject, which is represented solely by the Standard in its entirety. While use of the material has been authorized, CSA Group is not responsible for the manner in which the data are presented, nor for any representations and interpretations. No further reproduction is permitted. For more information or to purchase standard(s) from CSA Group, please visit Store – CSA Group or call 1-800-463-6727.
