Survey Says: Electrical Equipment Installation Drives Electrican Employment by Segment 2013 Versus 2014
Electrical Equipment Installation drives electrican Employment by segment 2013 versus 2014
Related Articles
Common Misconceptions Related To Use Of Electrical Equipment And Electrical Design and Installations
During many years of writing various articles I am fortunate to receive numerous e-mails with questions and comments from the readers. This feedback demonstrates that there are plenty of misconceptions among the electrical designers, contractors and regulators on certain provisions of the legally adopted National Building Code of Canada (NBC) and the Canadian Electrical Code, Part I (CE Code) in respect to use and installation of electrical equipment.
Essential Tools for Enhancing Energy Efficiency in Buildings
November 3, 2023 Energy efficiency is a critical consideration for anyone looking to reduce energy costs and minimize environmental impact. One way to achieve this goal is by using various tools and instruments to identify and address potential sources of energy waste in buildings. In this article, we will explore essential tools that can help…
Wire to Wire: Emma Becker
In this edition of Wire to Wire, IDEAL Electrical is celebrating Apprentice Emma Becker.
Celebrating Canada’s First Black Female Master Electrician
Fabruary 7, 2024 In honour of Black History Month this February we are highlighting Shelly Harding-Smith, who holds the distinction of Canada’s first black female Master Electrician. Harding-Smtih was born and raised in Windsor, Ontario, and began attending jobsites alongside her father at a young age. Harding-Smith’s parents, Morris Harding and Ruth Henderson-Harding ran Harding…
Leadership, D&I, Supply Chain, and how Schneider Electric is Driving Electrification Through Digitization with Adrian Thomas
Adrian Thomas has been with Schneider Electric for 6 years, serving in several roles before taking on the challenge of Canadian President for Schneider Electric in January of 2021. We spoke to him about his experience in the role so far, his approach to leadership, energy management, supply chain resilience, how digitalization is enabling sustainability, and the importance of diversity and inclusion.
Common Misconceptions Related To Use Of Electrical Equipment And Electrical Design and Installations
During many years of writing various articles I am fortunate to receive numerous e-mails with questions and comments from the readers. This feedback demonstrates that there are plenty of misconceptions among the electrical designers, contractors and regulators on certain provisions of the legally adopted National Building Code of Canada (NBC) and the Canadian Electrical Code, Part I (CE Code) in respect to use and installation of electrical equipment.
Essential Tools for Enhancing Energy Efficiency in Buildings
November 3, 2023 Energy efficiency is a critical consideration for anyone looking to reduce energy costs and minimize environmental impact. One way to achieve this goal is by using various tools and instruments to identify and address potential sources of energy waste in buildings. In this article, we will explore essential tools that can help…
Wire to Wire: Emma Becker
In this edition of Wire to Wire, IDEAL Electrical is celebrating Apprentice Emma Becker.
Celebrating Canada’s First Black Female Master Electrician
Fabruary 7, 2024 In honour of Black History Month this February we are highlighting Shelly Harding-Smith, who holds the distinction of Canada’s first black female Master Electrician. Harding-Smtih was born and raised in Windsor, Ontario, and began attending jobsites alongside her father at a young age. Harding-Smith’s parents, Morris Harding and Ruth Henderson-Harding ran Harding…
Leadership, D&I, Supply Chain, and how Schneider Electric is Driving Electrification Through Digitization with Adrian Thomas
Adrian Thomas has been with Schneider Electric for 6 years, serving in several roles before taking on the challenge of Canadian President for Schneider Electric in January of 2021. We spoke to him about his experience in the role so far, his approach to leadership, energy management, supply chain resilience, how digitalization is enabling sustainability, and the importance of diversity and inclusion.
Common Misconceptions Related To Use Of Electrical Equipment And Electrical Design and Installations
During many years of writing various articles I am fortunate to receive numerous e-mails with questions and comments from the readers. This feedback demonstrates that there are plenty of misconceptions among the electrical designers, contractors and regulators on certain provisions of the legally adopted National Building Code of Canada (NBC) and the Canadian Electrical Code, Part I (CE Code) in respect to use and installation of electrical equipment.
Essential Tools for Enhancing Energy Efficiency in Buildings
November 3, 2023 Energy efficiency is a critical consideration for anyone looking to reduce energy costs and minimize environmental impact. One way to achieve this goal is by using various tools and instruments to identify and address potential sources of energy waste in buildings. In this article, we will explore essential tools that can help…
Wire to Wire: Emma Becker
In this edition of Wire to Wire, IDEAL Electrical is celebrating Apprentice Emma Becker.
Celebrating Canada’s First Black Female Master Electrician
Fabruary 7, 2024 In honour of Black History Month this February we are highlighting Shelly Harding-Smith, who holds the distinction of Canada’s first black female Master Electrician. Harding-Smtih was born and raised in Windsor, Ontario, and began attending jobsites alongside her father at a young age. Harding-Smith’s parents, Morris Harding and Ruth Henderson-Harding ran Harding…
Leadership, D&I, Supply Chain, and how Schneider Electric is Driving Electrification Through Digitization with Adrian Thomas
Adrian Thomas has been with Schneider Electric for 6 years, serving in several roles before taking on the challenge of Canadian President for Schneider Electric in January of 2021. We spoke to him about his experience in the role so far, his approach to leadership, energy management, supply chain resilience, how digitalization is enabling sustainability, and the importance of diversity and inclusion.
Latest Articles
-
EFC Supporting Industry Amongst Tariff Uncertainty
As a major representative of the electrical and automation industry, Electro Federation Canada remains committed to supporting its members and the industry overall in navigating the complexities of international trade policies. Read More…
-
CanREA Launches New and Improved Go Solar Guide 2025
March 21, 2025 The Canadian Renewable Energy Association (CanREA) launched the 2025 edition of its annual Go Solar Guide today, encouraging Canadians to go solar. The 2025 version is new and improved: Now a web portal, it is free and accessible to everyone, anytime. “CanREA is proud to produce an annual consumer guide containing everything… Read More…
-
STANDATA Interpretation: 2024 Canadian Electrical Code, Part 1 Section 6 – Number of Supply Services Permitted
March 21, 2025 Purpose To clarify requirements for installations regarding the number of supply services permitted to be located on one unit of a building consisting of row housing for residential occupancies. Discussion There has been inconsistent application of the 2024 Canadian Electrical Code (CE Code) Part 1, Rule 6-102 regarding type and location where… Read More…
-
PEI Pauses Solar Electric Rebate Program
March 21, 2025 Rebate pre-approval letters for the Solar Energy Rebate program are currently on hold as the PEI government conducts a program review to ensure it continues to provide the best possible benefits to the most Islanders. We appreciate your patience. We do expect the program to be operational in the coming weeks. Check… Read More…
Changing Scene
-
Mersen Fuse Selection Guide
March 21, 2025 Unlock Instant Access to the Mersen Fuse Selection Guide Learn how to match voltage ratings, nail amperage calculations, master interrupting ratings, and conquer temperature derating, all without breaking a sweat. Go HERE to download Read More…
-
EFC’s Business Sections Welcomes New Field Service Vice Chair
March 21, 2025 EFC is pleased to announce Matthew De Ciantis, M&D De Ciantis Enterprises Inc., as the new Vice Chair of the Field Service Business Section. Matthew is a long-standing professional in the electrical industry who fulfilled many roles within his generational family electrical contracting company. Matthew’s experience and breadth of operational knowledge has… Read More…
-
EFC Welcomes New Manufacturer Member: NOARK Electric
March 21, 2025 NOARK Electric is a global manufacturer of low, medium and high low voltage electrical components for industrial applications. They specialize in providing electrical circuit protection and motor control solutions for OEMs, contractors, and distributors. Dedicated to quality and value, their mission is to deliver top-tier products at exceptional price, backed by world-class… Read More…
-
Mac’s II Agencies Strengthens Lighting Division
March 19, 2025 Mac’s II Agencies Announces Jamie Capell as the New Sales Manager for Lighting Specification Mac’s II Agencies is pleased to announce the expansion of its lighting division with the addition of Jamie Capell as the Sales Manager for Lighting Specification. Jamie brings 25 years of experience in the lighting and electrical industry, most notably… Read More…
