Decontaminating Your Equipment and Workspace With UV-C Light

UV Lighting and COVID

Sept 8, 2020

UV-C light is a key component to sterilizing your workspace and its equipment. UV-C light kills viruses and bacteria, and has been proven to kill coronaviruses like SARS and MERS. As of June 2020, it is being used all around the globe for this very purpose.

In addition, UV-C light is a method approved by the Centers for Disease Control and Prevention (CDC) to decontaminate personal protective equipment (PPE) so it can be reused during N95 mask shortages. The Canadian government is using UV-C within its headquarters to sterilize important workspaces. Subway stations in New York are using UV-C to decontaminate the cars for safe passenger rides. UV-C is a well-established, proven technology that is becoming popular in the wake of the coronavirus (COVID-19) pandemic, but one question about UV-C is how to use this light. How can you use it for your equipment sterilization? How can you use it to protect yourself, your employees and your customers?

What is UV-C?

UV-C light is a type of ultraviolet light on the electromagnetic spectrum that is invisible to the human eye. It uses short-wavelength ultraviolet radiation that is blocked from entering the planet by the ozone layer — but it can be recreated on Earth. It is the type of wavelength that allows UV-C light to effectively enter and penetrate the RNA cells of microorganisms, damaging the nucleic acids within. This renders bacteria and viruses inactive and unable to survive.

It is important to remember that UV-C also can be harmful to humans. The same wavelength that can enter the RNA of microbes can damage unprotected human skin and eyes. It is of the utmost importance to take special safety precautions when handling UV-C light.

UV-C benefits

UV-C LED light has numerous benefits that should be taken into account when you are evaluating your decontamination needs. The biggest benefit is that UV-C LED lights have no chemicals, no toxins, and will effectively kill viruses and bacteria with the light output. This allows you, your employees and your customers to stay safe. Furthermore, UV-C LED light is a low-touch and easy to use method to decontaminate your space.

Set up the lights in your desired decontamination area and by using a delay timer, start the sterilization once all humans and animals have left the area. Other benefits for companies:

• a UV-C LED light also can be rented out to your customers. Outline the risks associated with UV-C lights in your rental contract to waive any liability.

• the lights are virtually maintenance free. They are durable LED chips that contain no toxins or glass, and the LED chip is guaranteed to last for 30,000 hours.

Using UV-C lights to decontaminate the workspace

There are countless configurations available for each unique space and area. There are a few key points to highlight which will help your decontamination process.
First, determine the size of the area you want to decontaminate. When looking at your area, think about the measurements of the room or object. Are there shadows or barriers that would influence the light output towards the desired decontamination area?

Second, how quickly do you want to decontaminate? Is this something you want to decontaminate during the day? Would you prefer to leave it overnight to clean while everyone is away? The desired decontamination time will indicate how many lights are needed to kill the virus/bacteria within a specific time frame.

Once these questions are answered, it is time to evaluate how to set up the lights. The light range will spread in 60 degrees and can reach a far distance. However, the farther away the desired destination, the longer it takes to decontaminate. With that in mind, it is important to keep the desired decontamination space/object as close to the light as possible with no light barriers or shadows. If there are shadows, you may need to reanalyze the setup or purchase more lights.
Before purchasing, talk to the UV-C manufacturer for decontamination layout assistance. They can help to optimize the best UV-C layout for your area. When using UV-C light in a main room, a delay timer would be an ideal accessory. Since UV-C is harmful to humans and animals, everyone must evacuate the space before the light energizes. A delay timer can be used here to provide enough time to ensure everyone has evacuated.

These techniques can be utilized to decontaminate equipment as well. The light needs to be as close to the equipment as possible, the UV-C light needs to touch every aspect of the equipment to fully disinfect it. Setting up an equipment layout uses the same strategies as highlighted above.

A common sterilization method for smaller equipment is to place UV-C lights within an old sea container, creating a UV-C decontamination box. Thoughtfully place the equipment in the middle of the container and then decontaminate the equipment from all sides and angles.

3 UV-C light checklists

• Before purchase

1. Research what UV-C light is and understand the cautionary aspects.
2. Determine the space/area/equipment you wish to decontaminate.
3. Figure out how many shadows you have or any objects that obstruct the light.
4. Decide how and when you want to use UV-C for sterilization.
5. Find a reliable, reasonably priced UV-C manufacturer.
6. Figure out the light placement needed for proper decontamination. Some UV-=C manufacturers can provide layout assistance.

• UV decontamination checklist

1. Make sure lights are placed in the proper areas and no objects are in the way to obstruct the light.
2. Be sure the room has been evacuated.
3. Place warning signs outside of the room to alert people of UV-C decontamination in progress.
4. Plug in lights outside the room once all is ready.
5. Set a timer for the amount of time you need to decontaminate.

6. Enter the room only when you are certain the light has turned off.

This article was first published online by Lind Equipment; www.lindequipment.net/blogmain/2020/8/4/ara-decontaminating-with-uvc-light. It has been lightly edited.

Photo by Martin Sanchez on Unsplash

Related Articles


Latest Articles

  • Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 56

    Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 56

    February 6, 2026 By William (Bill) Burr The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B or Read More…

  • 3D Printing: Inside Lighting’s Next Revolution

    February 5, 2026 While 3D printing in mass production was once a dream, advancements in the technology have moved it more into the mainstream. The technique, which is also referred to as additive manufacturing, has rapidly evolved from a niche prototyping tool into a transformative production method for many sectors, including the lighting industry. As Read More…

  • Microgrids & Power Quality: Designing Resilient, Clean Facility Power

    Microgrids & Power Quality: Designing Resilient, Clean Facility Power

    February 5, 2026 In an era of extreme weather, aging infrastructure, and ever‑rising energy demands, many facility managers are rethinking their relationship with the grid. Microgrids offer a way to take control and operate autonomously when necessary. A microgrid is more than just backup, when designed properly, it becomes a platform for resiliency, efficiency, and Read More…

  • ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    ITC 101: Understanding NEMA Ratings for Electrical Enclosures

    February 5, 2026 Understanding NEMA Ratings for Electrical Enclosures NEMA Ratings are an essential classification system used across North America to define the environmental and mechanical protection provided by electrical enclosures. Developed by the National Electrical Manufacturers Association (NEMA), these ratings help engineers, installers, and specifiers identify the appropriate enclosure type for industrial, commercial, and outdoor Read More…


Changing Scene

  • Lighting What’s Next: Stanpro Celebrates 65 Years

    Lighting What’s Next: Stanpro Celebrates 65 Years

    February 6, 2026 “We didn’t get here by standing still. For 65 years, we’ve shaped how we think, how we design, and what responsibility means,” the company said in a LinkedIn post. “Today, that thinking takes a new form. Not to change who we are, but to express our evolution more clearly. This is Stanpro, Read More…

  • Housing Priorities on Track in New Brunswick, but More Work to do: Hickey

    Housing Priorities on Track in New Brunswick, but More Work to do: Hickey

    February 6, 2026 Efforts to support the creation of new affordable housing and reduce chronic homelessness are on track, but there is still lots of work to do, according to David Hickey, the minister responsible for the New Brunswick Housing Corporation. New data indicates progress has been made on three key government priorities related to Read More…

  • BJ Electric is now Bernie’s Electric Supplies Ltd

    BJ Electric is now Bernie’s Electric Supplies Ltd

    February 6, 2026 BJ Electric had been teasing a major announcement on their social media recently, before finally announcing last week they have rebranded as Bernie’s Electric Supplies Ltd, a nod to the company’s founder and legacy. “BJ Electric Supplies is now Bernie’s Electric Supplies—in honor of our founder, Bernard Joseph Thompson, and the values Read More…

  • The Government of Canada Introduces the Build Canada Homes Act

    The Government of Canada Introduces the Build Canada Homes Act

    February 6, 2026 The Government of Canada has introduced the Build Canada Homes Act, legislation that will establish Build Canada Homes as a Crown corporation whose mandate will be dedicated to building affordable housing in communities across the country. As Canada’s affordable housing builder, this legislation will equip Build Canada Homes with the necessary tools to Read More…