|

Stanpro SLBFN Weatherproof Battery Unit

SLBFN EBWD 2SideHeads Angled 600x400

October 28, 2022

The NEMA4X and EEMAC4X rated SLBFN series of weatherproof battery units are designed to operate in the most extreme environments. The non-metallic, reinforced, fully sealed enclosure offers a hinged lid with durable screw locks. Equipped with vandal resistant wet location heads designed to operate in extreme environments, they are fully protected in a polycarbonate housing with gasket.

  • VAC 120/347 or VAC 277, 60Hz input
  • High-efficiency, fast-recovery, precision-controlled charging system
  • Push Button Momentary Test Switch
  • Diagnostic/Driver LED for CA ENABLE and CHARGE
  • Current-limiting charger, fully automatic
  • Protection against voltage reductions and short circuits
  • Sealed lead acid battery, maintenance free
  • Non-metallic enclosure with standardized gray finish
  • Polycarbonate heads with gasket to prevent water infiltration
  • CSA C22.2 141-15 certified

Related Articles


Latest Articles

  • Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara

    Celebrating 30 Years of Innovation and Collaboration at EFC’s 2025 Conference in Niagara

    By Luc Rodier, Chair of the Board of Electro-Federation Canada (EFC) The 2025 EFC Conference in Niagara was a landmark occasion—marking 30 years of innovation, collaboration, and collective progress in the Canadian electrical industry. Set against the symbolic backdrop of the Canadian-U.S. border, this year’s theme, Electrifying Connections, couldn’t have been more fitting. As President and… Read More…

  • Industrial Wiring Devices: A Brief Intro and How to Choose Them

    Industrial Wiring Devices: A Brief Intro and How to Choose Them

    June 9, 2025 Introduction: With the multitude of options on the market, it can be difficult to decide whether you need a pin and sleeve wiring device or a plug and connector in your industrial plant or facility. You might find your head swirling with thoughts about which option is best. Or you may not… Read More…

  • Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience

    Industry Leaders Head to Quebec to Strengthen Energy and Supply Chain Resilience

    June 9, 2025 By Electro-Federation Canada On June 3 and 4, a high-level delegation from Canada’s electrical and automation sector travelled to Montreal and Quebec City for a series of strategic meetings with Quebec government officials and key stakeholders. Organized by Electro-Federation Canada (EFC), this mission underscores the critical role the industry plays in advancing… Read More…

  • Electrifying Connections: A Celebration of Legacy, A Vision for the Future

    Electrifying Connections: A Celebration of Legacy, A Vision for the Future

    June 9, 2025 By Electro-Federation Canada This year’s Annual Industry Conference, held against the breathtaking backdrop of Niagara Falls, Ontario, was a landmark event with more than 710 Electro-Federation Canada community members. More than just a celebration of our shared history, it was a launchpad for new ideas, future-based dialogue, and deeper connections.   The energy and… Read More…


Changing Scene