Eaton’s new Metalux Cruze LED Luminaire provides a high-performing, energy-efficient and affordable ambient solution to commercial offices, schools, hospitals and retail projects. Featuring a contemporary styling and Eaton’s advanced LED technology, the luminaire provides energy savings of over 50% when compared to traditional fluorescent troffer products typically found in these applications.
“The Cruze luminaire’s highly efficient LED system with advanced optical design provides our customers with optimal light uniformity while delivering a high performance efficacy up to 132 lumens per watt,” says Mark Eubanks, President, Eaton’s Lighting Division. “It’s ideal for both retrofit and new construction projects and with a projected life of 60,000 hours, paybacks can be as low as two years.”
The Cruze product line is offered in 1-foot by 4-feet, 2-feet by 2-feet and 2-feet by 4-feet recessed sizes with four lens options including
• ribbed frosted acrylic lens
• smooth frosted acrylic lens
• square pattern insert
• round pattern insert
The luminaires are available in 3000 Kelvin (K), 3500K, 4000K and 5000K color temperatures at a typical 85 color rendering index. Four stocked lumen packages are offered with an additional 12 made-to-order options. The luminaires feature a lightweight 3.25-inch shallow housing and tool-less hinged door access for easy installation along with optional field install surface mount kits.
The Metalux Cruze luminaire is available with an optional integrated sensor control system, optimized to meet energy codes for occupancy sensing and daylight harvesting in smaller ambient spaces. Factory-wired offering out-of-the-box operation for easy installation, the control system switches the lighting on or off based on occupancy and dims the light when enough daylight is available. The system reduces time and complexity with no additional wiring and adds light control without commissioning. The sensor system achieves the lowest installed cost compared to traditional control product alternatives.
The Cruze luminaire is equipped with a zero to 10 volt continuous dimming driver for easy and flexible integration with lighting control panels, occupancy sensors, daylighting and room controllers. The luminaire is also available with a native Fifth Light Digital Addressable Lighting Interface (DALI) driver option for complete digital energy management.
Find out more: http://www.cooperindustries.com/content/public/en/lighting/resources/LightingStories/The-Metalux-Cruze-Story.html.
Other Products:
Eaton Offers Efficient Asymmetric Lighting Solutions for Large Open Spaces
Eaton’s LED Roadway Luminaire: High Performance, Energy Savings and Affordability
Eaton’s Halo LED Recessed Downlights for Slope Ceiling Applications
Eaton’s Energy Efficient Linear LED Luminaire Provides High Efficacy and Cost Effective Illumination to Open Ceiling Environments
Eaton’s Downlighting LEDs Add Brightness Control, Up to 80% Energy Savings
Eaton Relay Helps Achieve New Level of Energy Awareness, Safety and Diagnostics
Eaton’s Auto-Monitoring GFCBs and Wall Receptacles Advance Electrical Safety, Reliability
Eaton Laser-Etched Labels Help Authentication, Combat Counterfeiting
Eaton’s Award Winning LED Parking Garage Luminaire
Eaton’s J-Hook Colour ID Products for Data Centre and Light Commercial Cable Applications
Eaton Electric Vehicle Charging Stations: New Cord Connected Home Charger
Eaton’s New Variable Drive Series
Changing Scene
During the recently held IMARK Canada 2019 meeting in Niagara Falls, executives from 14 of the ...
Valard has been selected by Wataynikaneyap Power LP
to provide engineering, procurement ...
The Canadian Apprenticeship Forum-Forum Canadien sur l’Apprentissage (CAF-FCA) has announced ...
Electricity Human Resources Canada has announced this year's keynote speakers for Agents of Change ...
Kiashke Zaaging Anishinaabek (KZA)/Gull Bay First Nation (GBFN) and Ontario Power Generation (OPG) ...
The BCEA's Woman's Network THRIVE Summit is taking place on October 4th at the Executive Inn ...
NSI Industries has announced the acquisition of electrical products manufacturer Bridgeport ...
The National Electrical Trade Council (NETCO)—jointly sponsored by International Brotherhood ...
IDEAL Electrical has launched its fourth annual national competition to find the best ...
IDEAL Industries Canada has announced the appointment of Sean Bernard as Regional Sales Manager to ...
Electrician Forum Brought to you by Schneider Electric
As industry experts you know the products you use everyday better than anyone and should have input on what information you receive about products and what could improve them.
Therefore, we want your insight on the biggest challenges or issues you face when installing loadcentres, breakers (CAFI, GFI's…) and other surge protection devices. We ask that you do not provide product specific details but rather your general issues and concerns or any questions that have come to mind while working with these product types. Provide us with your valued expert insight into the issues you have faced so manufacturers can better inform you about the installation and use of these products. Lets generate some discussion that will help guide the Industry.
Make your comments HERE
Sonepar Canada has announced the launch of new mobile applications for Gescan Vallen, Sesco and Lumen.
The mobile apps were officially released as of June of this year and features barcode scanning, access to pricing, product availability, store locator and much more – 24 hours a day, 7 days a week.
The new mobile app is changing the way customers can interact with the Operating Companies within Sonepar Canada. The barcode scanning functionality is a popular feature amongst customers allowing them to scan an item easily and add it to their cart.
Read More
NB Power recenly announced it will seek approval to build a new transmission line in the Fredericton area, which will improve the reliability of the power grid in the region for approximately 25, 000 customers.
The new proposed 15-kilometre transmission line will run from the Rainsford Substation, in Fredericton, to the Mactaquac Terminal.
“NB Power strives to offer its customer a reliable power grid that meets or exceeds all utility standards,” said NB Power’s President and CEO, Gaëtan Thomas. “This will increase transmission reliability for customers in the Fredericton region with fewer interruptions that can be restored within minutes rather than hours or days.”
Read More
Codes and Regulations Brought to You by the CSA Group
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the ...
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the ...
In this article: Tables — Part B. This section of the Code contains 99 tables of essential ...
In this article: Section 58 — Passenger Ropeways and Similar Equipment. Rule 58-000 ...
Unauthorized CSA Group certification marks have been found on wiring by Triumph Cable ...
In this article: Section 52 — Diagnostic imaging installations. The CE code is a ...
In this article: Section 46 — Emergency Power Supply, Unit Equipment, Exit Signs, and ...
In this article: Section 44 — Theatre Installations. The CE Code is a ...
CSA has published C22.2 No. 60947-7-3, the harmonized standard for low-voltage switchgear and ...
Electric welders. The CE Code is a comprehensive document. Sometimes it can seem ...
By Kevin Smee, Vice President Sales at AimLite
Most of us take light for granted. It has become so ubiquitous and cheap to use that we don’t really stop to think about emergencies. Thankfully most buildings are required by law since 1974 to be equipped with emergency lighting that automatically activates during power failures to facilitate our exit.
Emergency lighting is only one component of a building’s life safety systems, but perhaps one of the most important.
Read More
Latest Articles
Pick up a newspaper or scan your preferred electronic newsfeed and you’ll likely see a series ...
Britech Corp, one of Canada’s largest heating cable companies has signed a formal agreement ...
Electrical enclosures serve to protect electrical devices from adverse environmental influences, ...
Open office design has exploded in popularity over the last 20 years. In fact, the New Yorker magazine claims that approximately 70% of all offices now have an open floor plan.[1]
How did we get here?
Although open offices have been around since the mid-1700s, the cubicle culture developed by Hermann Miller in 1964 became very popular in the 1980s and 1990s. By the early 2000s, open office design started to re-emerge in an effort to encourage more collaboration and Silicon Valley was among the first to embrace sleek, open office workspaces as the norm.
Read More
Tools for the Trade
IDEAL Industries has introduced Combination Drill Taps to its tool lineup. Combining the ...
Stripping and crimping device, 100 - 240 V input voltage, for insulated ferrules with a ...
Professional all-in-one cutter/stripper for coaxial and twisted pair cables
...
Klein Tools' Coax Explorrer 2 tests coaxial cable and maps up to 4 locations
...
Ideal Industries' T-14 wire stripper s are ideal for all professionals working within the ...
The ATS850 conveyor eliminates all types of electro static discharge requirements. ...
Lorik Tool & Automation has the experience and ability to manufacture a variety of ...
Ideal Industries' 26 piece insulated Journeyman kit is ideal for new electricians or for ...
Klein Tools Deluxe Fish Rod Set comes in 19 pieces that when assembled can fish wire and ...
BendWorks Software was designed to help electrical contractors adopt this new process ...
By Tony Oruga
Network crews were working in an electrical room tasked to install an 800 A disconnect for a temporary service on the network secondary. The 3-spot network was energized at 480 V on the secondary (34.5 kV on the primary) and all three network protectors were closed and serving load. Each network protector installed was a 3000 A, 480 V Eaton CM52 unit equipped with an Arcflash Reduction Maintenance SystemE (ARMS). Prior to performing their work, crews enabled the ARMS function on all three units in the spot. This put all three network protectors in a “hair-trigger” mode, ready to clear any current condition that exceeded 2.5x the nameplate rating.
Read More
These LED lamps are designed to meet or exceed the standards set out in the California Energy Commission’s Title 20 and Title 24 (JA8) Appliance Efficiency Regulations.
FEATURES
- MR16 GU5.3 and GU10 base; B11 Decorative E12 and E26 base
- 80% more efficient and 30x longer life than standard incandescent
- Shatter-resistant plastic housing for reduced risk of injury and breakage
- Compatible with a wide array of dimmers
- ANSI construction compliant
Read More
Peers & Profiles
Ali Heighton is the Program Coordinator for IBEW Local 37 who has found success as a young ...
Flextherm was founded in 1991 by current company President, Philippe Charron. For more than 25 ...
Ouellet Electric Heating began humbly in 1960 with Charles-Emile Ouellet, who started manufacturing ...
Justin Harris is a Programmer/Electrician for COREngineering, a New Brunswick based mechanical ...
Bill Maki is an Electrical Engineer from Thunder Bay, Ontario working as a Control Systems ...
Benedict Electrical Contracting Limited is a locally owned and operated family business in Owen ...
Spark Power Corp. is one of North America’s leading independent providers of integrated ...
Marcia Ranger is a master construction and maintenance electrician, as well as a college professor ...
Con’s Electric Company Limited was established in 1985. Based in Timmins Ontario, only 700 ...
Mark Unsworth is an electrical engineer with over 35 years of experience in project management, ...
Copper $US Dollar price per pound
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/copper-d.gif)
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/spot-copper-60d.gif)
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/spot-copper-6m.gif)
