VYKON Edge Controller 10
Jan 11, 2019
VYKON Edge Controller 10 is an IP-based field equipment controller powered by the Niagara Framework. VYKON Edge Controller 10s drive applications such as zone temperature control, and the operation of fan coil units, single-stage air handling units, water-source heat pumps and more. VYKON Edge Controller 10s run the full Niagara stack, with 10 points of on-board IO and IO-R-34 expansion capability. VYKON Edge Controller 10 licensing supports three devices and 50 total points to harness the full power of Niagara at the edge.
- VYKON Edge Controller 10s can be daisy chained to continue network connectivity and eliminate the need for separate wiring back to a switch
- Connect VYKON Edge Controller 10s to your main building or IT network and manage them directly with a Supervisor alongside of a JACE
- Use the secondary Ethernet port of the JACE 8000 to create a private network of VYKON Edge Controller 10s
For more information go HERE
![Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 52 — Diagnostic imaging installations](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
