-
You are here:
-
Home
-
Product News
-
Electri-Flex Releases New Electrical Conduit Catalogue
Nov 19, 2020
Shat-R-Shield's Correctional Cell Fixture is designed to withstand extreme abuse by using materials that are virtually indestructible. Built with 1/2" thick 304 Stainless Steel and a cast .400" thick diffused lens, this light fixture is built to withstand hard/repetitive impacts and its tight design offers no point of entry.
The Ironclad® Vandal-Resistant (VR Pro) fixture uses an LED high efficiency light engine with a cool light that simulates daylight. The incorporated count light LED module can be turned on and off. Tested to Canadian and US standards by Underwriters' Laboratories, this fixture carries a cULus rating.
Specifications:
Lumens: 4400 (42W)
Count Light Lumens: 680
Light Engine CCT: 5000K, 4000K, 3500K, 2700K
Count Light CCT: 2700K
Life Hours: L70>75,000 Hours; Projected > 100,000 Hours
Footcandles: 35ftc at the desk level; 22ftc at the floor
Voltage: Universal 120-277V
Weight: 7.9 lbs.
Warranty: 5 year limited warranty
Dimensions: 12.25" diameter x 1.9" tall
Go HERE for more information.
Are You Ready For Winter?
A special offer for you this season
Buy $350 worth of eligible Surge Protection Devices from Schneider Electric and get a free jacket. Hurry Now! Offer ends February 28th 2022.
CTA: Get Offer Now!
Top Recurring Revenue Business Ideas for Electricians
We’ve all heard the saying, “Money doesn’t grow on trees.” Sadly, there’s no way to plant dollar bills for your electrical business that will grow into hundreds overnight (wouldn’t that be nice?).
While I can’t gift you a money tree, after talking to dozens of our electrical customers, I can tell you that one of the best ways to grow your business is through recurring revenue.
What is Recurring Revenue and Why Should Your Electrical Business Have It?
Recurring revenue is predictable, stable revenue that comes into your business at regular intervals. It helps you better maintain cash flow, reduce reliance on one-time sales and most importantly, allows you to forecast revenue so that you can make better decisions for the future of your business.
Read More
What is EPLAN?
One platform, multiple solutions – the Eplan Platform offers engineering software such as Preplanning for systematic preliminary planning, Electric P8 for preparing circuit diagrams and Pro Panel for 3D enclosure planning, all from a single source. Standardised interfaces and integration processes enable continuous data flows throughout the value chain, with additional links to various system solutions from Rittal.
This year, EPLAN has introduced its new EPLAN Platform 2022 to help address challenges in the design, engineering and manufacturing phases of the panel building process...
Read More
Changing Scene
The 2021 Canadian Electrical Code, Part I (twenty-fifth edition) automatically comes into force on ...
The Ontario Electrical League (OEL) is celebrating 100 years of reliability within the electrical ...
ECAO and NECA have announced that on January 1 ECAO officially joined NECA as their 119th Chapter. ...
A virtual event hosted by CAF-FCA to engage employers about the business case for apprenticeship.
...
British Columbian organizations developing low-carbon building solutions can now apply for a third ...
More and more businesses, industries and people are going ‘grid independent.’ This means Licensed ...
CSA Group, a global leader in Testing, Inspection and Certification, has announced the opening of a ...
Sense announced a new standards-based open source effort to enable software to ...
In November, the 2021 Virtual AD Supplier Summit Industrial & Safety–Canada Division event saw ...
Electro-Federation Canada (EFC), through the support of its members, is proud to support university ...
ECAO and NECA have announced that on January 1 ECAO officially joined NECA as their 119th Chapter. Executive Director Graeme Aitken joined NECA CEO David Long on LinkedIn Live to announce the partnership.
Given the similarities between the two organizations, ECAO is looking to create more opportunities for its electrical contractor members and this further collaboration will allow them to facilitate that. As well as drawing on the educational opportunities that NECA can offer.
“What we’re looking for is integration, professionalism, but most importantly to expand our community."
Read more
Have you ever been called to fix the work of a 'handyman'?
"Was supposedly done by a"certified ' electrician....told the homeowner that he got a $266 permit....no record at TSBC. Can you count the deficiencies?"
"There is a second panel change in the triplex also.......even more deficiencies. Think the guy was a glorified handyman. Ones not obvious: 240 BB heat hooked up 120....drier on 2p20....range on 2p50....water heater fed with 2c14 Bx on 2p15."
Go HERE to join the discussion
Latest Articles
This technical Q&A was done as part of ESA’s annual Licence Holder Meeting on November 18th. A ...
ECAO and NECA have announced that on January 1 ECAO officially joined NECA as their 119th ...
Rule 54-000 states that this is a supplementary or amendatory section of the code and applies ...
This is the third article we’ve done in this series with Trilliant Canada Managing Director, Steven ...
Rule 52-000 Scope - states that Section 52 is a supplementary or amendatory section of the code ...
Clarifies requirements for installing, altering, or adding to lightning protection systems. ...
Investment in building construction declined 0.7% to $17.5 billion in September, ...
The total value of building permits increased 1.3% to $10.3 billion in October, led by ...
As part of Schneider Electric’s Innovation Summit held virtually on November 10th, Electrical ...
As I come to the end of my second year of apprenticeship, I find myself reflecting on the last ...
By Blake Marchand
This technical Q&A was done as part of ESA’s annual Licence Holder Meeting on November 18th. A recording of the entire meeting is available online. The technical Q&A began with a general overview of ESA’s top 5 changes provided to the 2021 Canadian Electrical Code by Malcom Brown.
Following that, Brown goes through a number of questions submitted by LECs (Licenced Electrical Contractors), covering several topics, including EV energy management systems, GCFI and AFCI protection, nuisance tripping for washing machines and microwaves, smoke alarm requirements, and common inspection defects.
Read More
Greenlee, part of Emerson’s professional tools portfolio, introduces the new ESG45LX Gator Hard Metal Cutter, a tool solution for the high-voltage industry, featuring an industry-first shock-load damping system that minimizes released energy while making cuts.
The ESG45LX is ideal for overhead one-handed operation and cuts up to 1/2-inch Rebar (Schedule 60) and EHS Guy Strand and 5/8-inch Ground Rod and Standard Guy Strand. It has a compact, lightweight design, weighing less than eight pounds with battery, and is 33 percent lighter than an earlier model thanks to a redesigned flip-top style latch that reduces overall weight.
Read More
Peers & Profiles
Watt’s the Word is a recently launched Electrical Industry Podcast hosted by Zack Hartle and ...
Allana Kellett-Jamieson loves working in the electrical sector and is proud of the great focus ...
As the head of ABB Canada's electrification business unit, Éric Deschênes is no newcomer to the ...
Karen Pullen knows what it’s like to be the only woman on a construction site, and as a proud ...
As of February 2021, Martin Stephenson is the new President and CEO of Signify Canada.
...
This past July, Kerith Richards, who has worked for Service Wire Company for the last seven years, ...
EngWorks was formed in 2004 as an electrical engineering and consulting firm by Allan Bozek, “After ...
Headquartered in Concord, Ontario, Mercury Lighting services national retail, ...
Among the recipients of the 2021 Clean50 Awards announced last month is Carolina Gallo, Vice ...
Sarah Silverstein is a principal with Liteline along side her two brothers Mark and Daniel. ...
By Blake Marchand
Charlie Harte is the Canadian President & CEO for LEDVANCE LLC, as well as holding the role of VP of Marketing & Customer Experience for the U.S. and Canada region. Harte was named as the Canadian President in February 2020 and not long after was also named as the VP of Marketing and Customer Experience. Our interview centered around his experience joining LEDVANCE right before the pandemic, how he approaches leadership, where LEDVANCE wants to find success, and his perspective on the broader industry.
Harte spent 30 years working for some top brands in the building materials industry where he honed a strong skill set in sales, marketing, strategic planning, business development, and leadership. He joined the organization a month before the global pandemic which provided a unique scenario. “You’re starting to lead an organization with whom you almost have no connection,” he noted.
Read More
Copper $US Dollar price per pound
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/copper-d.gif)
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/spot-copper-60d.gif)
![[Most Recent Quotes from www.kitco.com]](http://www.kitconet.com/charts/metals/base/spot-copper-6m.gif)
