Medical Grade Plug-In Line Isolation Transformers
Jan 12, 2021
Intended for non-patient connected indoor applications where protection of sensitive electronics is required: High end audio / studio use; Medical electronics; High end test equipment / laboratory.
• cULus Listed to UL 60601-1 (1st Edition) and CAN/CSA-C22.2 No. 601.1-M90 (R2005).
• Each unit provides complete line isolation and noise filtering plus utilizes a Faraday shield to reduce leakage currents below UL60601-1 requirements (under 100 microamps).
• Reduced noise coupling due to floating AC output.
• Not intended to be used to supply power to life support appliances.
• 3 different VA Capacities available – – 500VA, 1000VA, and 1800VA. All rated 50/60Hz.
• 4 different electrical configurations;
◦ 120V-120V straight isolation (“178” series)
◦ 240V-240V straight isolation (“240” series)
◦ 240V-120V step down isolation (“289” series)
◦ 120V-240V step up isolation (“298” series)
• Vented 14-gauge steel housing with white powder paint
• Hospital Grade 3-wire grounded Input Plug (see chart).
• 2 or 3 Duplex Hospital Grade Output Receptacles (see chart).
• On-Off Switch / Circuit Breaker combo protected, and built in automatic Thermal Cut Out for added protection.
Go HERE for more information.
![Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 38](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2.png)
