Copper Spot Prices 2009-2014
Related Articles
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Enhancing Water Treatment Plant Efficiency with Solar Array and Active Harmonic Filtering
May 27, 2024 The search for renewable sources of energy has pushed the electrical industry to look into cutting-edge methods of generating and utilizing power in recent years and Water Treatment Plants are not an exception for being essential to ensuring a clean water supply. This case study explores the partnership between a Water Treatment Plant…
Determine the Right Arc Flash Protective Clothing for Each Application
The risk of electric explosion and arc flash injuries is high, from superficial burns to fatalities. The leading causes of occupational accidents are deficient maintenance and inspection of installations as well as unsafe practices due to inadequate training.
How to Make Your Open Office a Success
Open office design has exploded in popularity over the last 20 years. In fact, the New Yorker magazine claims that approximately 70% of all offices now have an open floor plan.[1]
How did we get here?
Why Measure Temperature?
Finding a problem with an infrared camera is sometimes not enough. In fact, an infrared camera image alone without accurate temperature measurements says very little about the condition of an electrical connection or worn mechanical part.
![Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 34](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 34
Rule 34-000 Scope, this is a supplementary or amendatory section of the code and applies to incandescent lamps, fluorescent lamps, high-voltage luminous discharge (cold-cathode or neon) tubes, high-intensity discharge lamps and other light-emitting sources such as LEDs.
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Enhancing Water Treatment Plant Efficiency with Solar Array and Active Harmonic Filtering
May 27, 2024 The search for renewable sources of energy has pushed the electrical industry to look into cutting-edge methods of generating and utilizing power in recent years and Water Treatment Plants are not an exception for being essential to ensuring a clean water supply. This case study explores the partnership between a Water Treatment Plant…
Determine the Right Arc Flash Protective Clothing for Each Application
The risk of electric explosion and arc flash injuries is high, from superficial burns to fatalities. The leading causes of occupational accidents are deficient maintenance and inspection of installations as well as unsafe practices due to inadequate training.
How to Make Your Open Office a Success
Open office design has exploded in popularity over the last 20 years. In fact, the New Yorker magazine claims that approximately 70% of all offices now have an open floor plan.[1]
How did we get here?
Why Measure Temperature?
Finding a problem with an infrared camera is sometimes not enough. In fact, an infrared camera image alone without accurate temperature measurements says very little about the condition of an electrical connection or worn mechanical part.
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 34
Rule 34-000 Scope, this is a supplementary or amendatory section of the code and applies to incandescent lamps, fluorescent lamps, high-voltage luminous discharge (cold-cathode or neon) tubes, high-intensity discharge lamps and other light-emitting sources such as LEDs.
Steve Mesh on Space Optimization with Networked Lighting Control
Saving energy is a huge benefit when you use a networked lighting control system. Fixtures can be turned off when not needed. Or they can be dimmed in response to available daylight or other input. Saving energy is a great reason to deploy a networked lighting control system, but it’s not the only one.
Enhancing Water Treatment Plant Efficiency with Solar Array and Active Harmonic Filtering
May 27, 2024 The search for renewable sources of energy has pushed the electrical industry to look into cutting-edge methods of generating and utilizing power in recent years and Water Treatment Plants are not an exception for being essential to ensuring a clean water supply. This case study explores the partnership between a Water Treatment Plant…
Determine the Right Arc Flash Protective Clothing for Each Application
The risk of electric explosion and arc flash injuries is high, from superficial burns to fatalities. The leading causes of occupational accidents are deficient maintenance and inspection of installations as well as unsafe practices due to inadequate training.
How to Make Your Open Office a Success
Open office design has exploded in popularity over the last 20 years. In fact, the New Yorker magazine claims that approximately 70% of all offices now have an open floor plan.[1]
How did we get here?
Why Measure Temperature?
Finding a problem with an infrared camera is sometimes not enough. In fact, an infrared camera image alone without accurate temperature measurements says very little about the condition of an electrical connection or worn mechanical part.
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 34
Rule 34-000 Scope, this is a supplementary or amendatory section of the code and applies to incandescent lamps, fluorescent lamps, high-voltage luminous discharge (cold-cathode or neon) tubes, high-intensity discharge lamps and other light-emitting sources such as LEDs.
Latest Articles
-
Grounded in Ontario: Episode 18 – Meter Bases – Bonding, Safety, and Section 10 Changes
July 24, 2025 ESA Technical Advisor, Trevor Tremblay, reveals how meter bases can go from simple to seriously risky if installed incorrectly. As code enforcement around meter bases ramps up, contractors must stay sharp, read all rules carefully (especially those “notwithstanding” clauses), and double-check labeling. With the right education and planning, the transition can be… Read More…
-
Report: Canada’s Construction Industry Agrees on the Importance of Investing in Technology to Meet Housing Demand
July 24, 2025 Faced with growing pressure to build more, faster, nine in 10 leading Canadian construction companies agree the industry must quickly adopt new, cutting-edge technologies, with most saying digital tools are already starting to boost their productivity, according to a new report from KPMG in Canada on digital maturity in the construction industry. “It’s good… Read More…
-
Home Renovation Savings Rebates in Ontario: Solar, Heat Pump, Smart Thermostat
July 21, 2025 The Home Renovation Savings™ program and make meaningful improvements today that pay off long term. Level up to a smart thermostat, invest in solar energy or install a heat pump. Smart upgrades like these can make your home more energy efficient, comfortable and ready for whatever the season brings. And best of… Read More…
-
Black & McDonald Celebrate Sustainable Success with Women’s College Hospital
July 21, 2025 Black & McDonald is proud to celebrate the remarkable sustainability achievements of Women’s College Hospital (WCH) — a dedicated member of the Greening Health Care (GHC) network, which supports healthcare facilities across North America in reducing energy use and greenhouse gas emissions. At this year’s GHC Summer Workshop, WCH was honored with… Read More…
Changing Scene
-
BC Hydro Making it Easier and More Affordable to Connect New Homes
July 24, 2025 BC Hydro is supporting the construction of new housing developments in growing communities by advancing changes to streamline upgrades and reducing the cost of new customer connections to BC Hydro’s electricity grid. “As communities across B.C. grow, so does the need for essential housing. We are committed to ensuring we’re ready to… Read More…
-
Mitrex Sets Record with Largest BIPV Solar Panel Mural at SunRise Residential in Edmonton
July 22, 2025 Building-Integrated Photovoltaics (BIPV) manufacturer, Mitrex proudly announces that its transformative SunRise Residential project in Edmonton, Alberta, has earned the Guinness World Record for the largest solar panel mural globally. This landmark project showcases Mitrex’s innovative BIPV solar panels, blending cutting-edge solar technology with vibrant cultural artistry to redefine sustainable architecture. Sustainable Architecture with BIPV Spanning over 30,000 square feet, the Mitrex eFacade PRO plus… Read More…
-
Nexans Unveils a Cable Made with 100% Recycled Materials
July 24, 2025 Nexans has reached a major milestone in its sustainability journey by developing a prototype cable made entirely from recycled materials — a first in the company’s history. This innovation combines technical performance, industrial feasibility, and a drastically reduced environmental footprint, marking a decisive step forward in circular economy. A cross-continental success story… Read More…
-
EFC Welcomes New Manufacturer Member: MGM Transformers
July 24, 2025 Since 1974, MGM Transformers has produced tough and trusted transformers designed to get the job done right. As a leading manufacturer, the company employs a highly experienced and dedicated engineering team that excels in custom designs. MGM Transformers is committed to excellent quality and service, offering industry-leading lead times and exceptional customer service. MGM Transformers specializes… Read More…
