![Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 52 — Diagnostic imaging installations](https://electricalindustry.ca/wp-content/uploads/2022/11/Guide-CE-Code-2-768x432.png)
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 52 — Diagnostic imaging installations
Rule 52-000 Scope – states that Section 52 is a supplementary or amendatory section of the code and applies to the installation…
-
-
Guide to the Canadian Electrical Code, Part 1[i] 26th Edition – A Road Map: Section 46
November 10, 2025 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendices B and…
-
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 44 — Theater Installations
Rule 44-000 Scope – states that Section 44 is a supplementary or amendatory section of the code and applies to electrical equipment and installations in buildings or parts thereof…
-
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 42 — Electric Welders
September 15, 2025 by William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B or…
-
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 40 — Electric Cranes and Hoists
Rule 40-000 Scope – This is a supplementary or amendatory section of the code and applies to the installation of electrical equipment and circuits for electric cranes, hoists, and monorails.
-
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: Section 38
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document.
-
Guide to the Canadian Electrical Code, Part 1[i] – A Road Map: 26th Edition, Section 36 – High Voltage Installations
Although Rule 36-000 has not yet been amended, note that the definition of voltage in Section 0 – Definitions has been revised in the 26th edition…
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 34
Rule 34-000 Scope, this is a supplementary or amendatory section of the code and applies to incandescent lamps, fluorescent lamps, high-voltage luminous discharge (cold-cathode or neon) tubes, high-intensity discharge lamps and other light-emitting sources such as LEDs.
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 32
Section 32, as outlined in rule 32 -000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, and protection, of fire alarm systems…
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 30
Section 30, as outlined in rule 30-000 Scope, is a supplementary or amendatory section of the code and provides additional and specific requirements for the location, installation, wiring, protection, and control of all lighting equipment.
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 28 – Motors and Generators
Rule 28-000 – Scope states that Section 28is a supplementary or amendatory section of the code and provides additional and specific requirements for the installation, wiring methods, conductors, protection, and control of all motors and generators.
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 26
Section 26 is a general section of the code and applies to the installation of all electrical equipment. Appendix B contains important additional helpful notes. This section is divided into several parts, with the general rules 26-002 to 26-012 applying to all electrical equipment and additional parts for specific types of equipment.
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 24 — Health Care Areas
December 6, 2024 By William (Bill) Burr[i] The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B, or…
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition – A Road Map: Section 22
Rule 22-000 outlinesthe Scope of Section 22 and that it amends or supplements the general requirements of the code. It provides specific rules for locations classified as Category 1 (moisture) or Category 2 (corrosive) environments that are significant enough to interfere with normal operation of electrical equipment.
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road: Section 20
October 7, 2024 Section 20 – Flammable liquid and gasoline dispensing, service stations, garages, bulk storage plants, finishing processes, and aircraft hangars. The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical…
-
Guide to the Canadian Electrical Code, Part 1[i], 26th Edition– A Road Map: Section 18 Hazardous Locations
September 9, 2024 By William (Bill) Burr[ii] The CE Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the information you need. This series of articles provides a guide to help users find their way through this critical document. This is not intended to replace the notes in Appendix B,…
